Just installed it on my spare partition, actually yesterday. Havent tried it before as i am using Zephyrots'10.5.2 v2 updated to 10.5.3.

IMHO Very very nice! i updated it to 10.5.3, added gfx strings and audio, its working like a charm.

I had a minor issue which i fixed today. Somehow i missed the option in 'Customizing installation' regarding ACPIplatform in spite of several offered options. Older version was installed which was preventing system to reboot properly. I could shutdown but when i want to restart, system would just freeze. Installed AppleACPIplatform 1.2.1 now and everything is working like a charm.

Tested CS3, Autodesk Maya, Toast (now its burning cds/dvds on my sata dvd-rw)

Great job on this one! And a note to the guys who wish to install it to pay attention when customizing install; eddie offered so many options, for newer or older machines, some choices (or letting the installation install its default choices) may or may not work on your system.

---

I tested it completely.
Dvd burning worked right after installation, yes with roxio toast 9. I installed no chipset kexts (sb600 for my board) during installation so drives in bios were set to sata->ahci mode. Toast works fine, no errors or whatsoever.

Later i installed chipset kexts, booted in native ide mode. This way i cant burn, 0x20 illegal request (or something like that). So if i want to burn i have to set drives to sata->ahci and then burn with toast.

---

How do you set drivers SATA -> AHCI ?

My SATA Controller is different. (Also i dont have option in motherboard settings to enable AHCI)

Do you have any reboot issues? For some reason I can't restart all the way, I get to where the screen goes blank, but then it hangs, and I have to hit the reset button. I am using AppleACPIplatform 1.2.1, then I installed the one from Zeph 10.5.2 Rev2 because that partition does reboot fine.

No i dont have any reboot issues. Everything is working perfect, except DVD/CD burning.

Cool, wish I could get mine to work 100%... Everything else seems to work except my mouse stutters when I am transferring files and the reboot problem.

First try to change APIC ACPI settings in BIOS to S3.

Then if your mouse/keyboard (wireless) is from Logitech then there is Driver direct from apple. Search on their site. (Logitech control ceter installer)
http://www.logitech.com/index.cfm/494/3129&cl=us,en

Shift to USB keyboard and mouse. That works the best.

Already there Still does it. Sleep only seems to work with S1 too.

I'm happy that in 10.5.3 / 9.0.3 kernel the computer doesn't go in sleep mode no more if I press the power button. The system was awaking, but not the gfx card :-P

@ StealthMode:

Could you post your system configuration please?

---

2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64

AMD Opteron 165
DFI nForce4 Ultra-D
2gb G.Skill
nVidia 8800GT OC (Q/E, C/I in Tiger and Leo)
120gb SATA (Leo)
250GB SATA (XP)
250GB SATA (TimeMachine)
500GB SATA (Files)
Buffalo Wireless NIC (Broadcom)