delete the -v in the com.apple.boot.plist
open it with bbedit

it is in /library/preferences/systemconfiguration

just edit com.apple.boot.plist in /library/preferences/system configuration

<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>-v</string>
<key>Timeout</key>
<string>10</string>
to :

<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string></string>
<key>Timeout</key>
<string>10</string>

---

Intel Core2Quad Q8400
Gigabyte GA-EP43-UD3L
4 GB kit DDR2 PC 6400 G-Skill BlackEdition
500 Gb Seagate Baracuda SATA
GeForce 9600 GT 512 MB GDDR3 256Bit
Mac OS X 10.6.2 || Leopard 10.5.8 || Windows 7

Visit my OSX86 Blog : http://osx86.boeaja.info

Thanks guys answering my question,

Whenever i want to shutdown/restart my computer it shuts down the monitor, the harddrives, but my graphics card remains on, until I press and hold the shutdown button of my computer. Is there a way to fix this, or at least tell me if this is bad for my graphics card? Thanks!

---

MOBO: HP M8100n AMD Media Center TV PC
OS: 10.5.8 (Updated from iPC OSX86)
Kernel: 9.8.0 Voodoo Kernel
Processor: Athlon 64 X2 with Dual Core technology
MotherBoard: MCP61
Graphics: nVidia 9600gt 512 mb
Audio: Realtek ALC888: Digital Output
Chipset: Apple nForce ATA
Ethernet: MCP61 LAN (Realtek RTL8201N)

delian7, I am confident that the latest SMBIOS should address that problem.

thank you for replying.

I downloaded kext helper to help me intall SMBIOS from you webpage, but it still doesn't work. I still have to press the shutdown button to fully shutdown my computer.

Also, is there a program out there that can boot vista side by side with mac, when vista is installed on a MSDOS formatted hard drive. I have virtual box, but I think it requires vista to be installed again. The reason for this is that i want to watch tv through my hauppage hvr 1600 tuner.

Also i saw on your webpage how to change the hibernate mode, but when i did it, it gives me error 0xe0002bc cannot write energy saver preferences to the disk..

Any help on my 3 issues would be great!! Thank you so much!

---

MOBO: HP M8100n AMD Media Center TV PC
OS: 10.5.8 (Updated from iPC OSX86)
Kernel: 9.8.0 Voodoo Kernel
Processor: Athlon 64 X2 with Dual Core technology
MotherBoard: MCP61
Graphics: nVidia 9600gt 512 mb
Audio: Realtek ALC888: Digital Output
Chipset: Apple nForce ATA
Ethernet: MCP61 LAN (Realtek RTL8201N)

bump

---

MOBO: HP M8100n AMD Media Center TV PC
OS: 10.5.8 (Updated from iPC OSX86)
Kernel: 9.8.0 Voodoo Kernel
Processor: Athlon 64 X2 with Dual Core technology
MotherBoard: MCP61
Graphics: nVidia 9600gt 512 mb
Audio: Realtek ALC888: Digital Output
Chipset: Apple nForce ATA
Ethernet: MCP61 LAN (Realtek RTL8201N)

Hey Fellas...

Been a Zeph user since 10.5.1 and have a stable install of it working. Moved to a larger HD and wanted to see how Leo4All would run. Did a restore from my old install and all is well except one small thing.....

Colin McRae Rally used to work just fine under Zeph. Now I get an error after it tries to startup. Deleted and reinstalled to no avail. Here's the error report....short version anyway.

Process: Colin McRae Rally Mac [887]
Path: /Applications/Colin McRae Rally.app/Contents/MacOS/Colin McRae Rally Mac
Identifier: com.feral.CMR05
Version: 1.0 (1.0)
Code Type: X86 (Native)
Parent Process: launchd [139]

Date/Time: 2008-05-27 21:51:22.063 -0500
OS Version: Mac OS X 10.5.2 (9C7010)
Report Version: 6

Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000b5b5b5b5
Crashed Thread: Unknown

Thread 0:
0 libSystem.B.dylib 0x96852bce __semwait_signal + 10
1 libSystem.B.dylib 0x9687d8cd pthread_cond_wait$UNIX2003 + 73
2 libGLProgrammability.dylib 0x90db0432 glvmDoWork + 162
3 libSystem.B.dylib 0x9687cc55 _pthread_start + 321
4 libSystem.B.dylib 0x9687cb12 thread_start + 34

Unknown thread crashed with X86 Thread State (32-bit):
eax: 0x00ea9038 ebx: 0xb5b5b5b5 ecx: 0x00000001 edx: 0x00ea9000
edi: 0x00f84ce8 esi: 0xb5b5b5b5 ebp: 0xb5b5b5b5 esp: 0xbfffe940
ss: 0x0000001f efl: 0x00010282 eip: 0xb5b5b5b5 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0xb5b5b5b5

Any thoughts on what is up? I originally installed the 9.2.0 kernel and then I'm now running the newer 9.2.2 in an attempt to fix this.

Thanks!

Rob

I've been using Zephyroth's 10.5.2 rev1 on my HP Pavillion and everything ran smooth as silk. With nothing but time to waste I decided to try another release for my AMD machine and concluded that Leo4allv3 would be a good candidate. So first off some specs....

AMD Athlon 64 X2 3800+
1GB DDR2 533MHZ
200GB SATA HDD
nForce 430
ASUS A8M2N-LA
Geforce 7300 GS PCIE X16
Realtek ALC888 onboard with digital out

Install went perfect the second time around (first time I chose the wrong nForce file as my board needed the newer one.. my bad not Eddie's), and on reboot I was shocked to actually hear sound as I had to use a Linux dump and the HDA Patcher with Zephyroth. Checking my sound preferences shows not only sound, but ALL ports working and available on my sound card! About the only thing I had to fix myself with this release was my LAN. When I installed Zephyroth I discovered the onboard LAN was a no go in OS X so I purchased a cheap PCI card. After installing the tulip.kext everything is running perfect. Great release for AMD users!

After digging a little more, is this an OpenGL issue? I found a few threads at InsanelyMac about an OpenGL bundle and something that might have changed from 10.5.1 to 10.5.2 and no longer being able to run PPC apps?

Currently i'm using leo4allv3.

Is that possible to lock it ,such that each time i boot my leo,
only 1 core is running ?So i no need to type cpus=1.....