Leopard 10.5.2 AMD EFI (OOTB) - Page 48

WinLinMac01 · #1 02-19-2008, 10:17 AM

Glad to hear everything is working for you and met your expectations megaargon!!! now please be considerate and help others that may be having problems with their installation since your experience I would say was perfect. I know you have patiently waited for the release and thank you for being so! We thought you went to Linux for some comfort or you were not so happy with the progress of this release timeframe, LOL, just kidding. Enjoy the release and don't hesitate to post any issues.

We will be more than happy to hear from you in the long run. Remember this is a family, a community for all that is are AMD-types. Let's all sustain positive relationships with one another as acquaintances and remain as a whole, and keep our ears and eyes open for Zephyroth, God of the AMD MAC.

=)

Quote:

[cite] megaargon:[/cite]Whew...install went on without any problems. Thank you so much Zeph. I was partying too much until I nearly crashed my other system, Windows Vista. very happy for this release and I remain optimistic throughout its lifespan. Love everything! I read what other people commented about me, don't really mind, since I know, I was too anxious for this update. We all have our different moods. I was feeling way overexcited. Anyway, back to work, and great that I have cherished this long-awaiting this release throughout the day.

megaargon1 · #2 02-19-2008, 10:23 AM

Definitely I will help. Funny I did not stick with Linux at all. Enjoying this release every bit. Thanks.

Quote:

[cite] WinLinMac01:[/cite]Glad to hear everything is working for you and met your expectations megaargon!!! now please be considerate and help others that may be having problems with their installation since your experience I would say was perfect. I know you have patiently waited for the release and thank you for being so! We thought you went to Linux for some comfort or you were not so happy with the progress of this release timeframe, LOL, just kidding. Enjoy the release and don't hesitate to post any issues.

We will be more than happy to hear from you in the long run. Remember this is a family, a community for all that is are AMD-types. Let's all sustain positive relationships with one another as acquaintances and remain as a whole, and keep our ears and eyes open for Zephyroth, God of the AMD MAC.

=)

Quote:

[cite] megaargon:[/cite]Whew...install went on without any problems. Thank you so much Zeph. I was partying too much until I nearly crashed my other system, Windows Vista. very happy for this release and I remain optimistic throughout its lifespan. Love everything! I read what other people commented about me, don't really mind, since I know, I was too anxious for this update. We all have our different moods. I was feeling way overexcited. Anyway, back to work, and great that I have cherished this long-awaiting this release throughout the day.

WinLinMac01 · #3 02-19-2008, 10:29 AM

=)

Quote:

[cite] megaargon:[/cite]Definitely I will help. Funny I did not stick with Linux at all. Enjoying this release every bit. Thanks.

Quote:

[cite] WinLinMac01:[/cite]Glad to hear everything is working for you and met your expectations megaargon!!! now please be considerate and help others that may be having problems with their installation since your experience I would say was perfect. I know you have patiently waited for the release and thank you for being so! We thought you went to Linux for some comfort or you were not so happy with the progress of this release timeframe, LOL, just kidding. Enjoy the release and don't hesitate to post any issues.

We will be more than happy to hear from you in the long run. Remember this is a family, a community for all that is are AMD-types. Let's all sustain positive relationships with one another as acquaintances and remain as a whole, and keep our ears and eyes open for Zephyroth, God of the AMD MAC.

=)

Quote:

[cite] megaargon:[/cite]Whew...install went on without any problems. Thank you so much Zeph. I was partying too much until I nearly crashed my other system, Windows Vista. very happy for this release and I remain optimistic throughout its lifespan. Love everything! I read what other people commented about me, don't really mind, since I know, I was too anxious for this update. We all have our different moods. I was feeling way overexcited. Anyway, back to work, and great that I have cherished this long-awaiting this release throughout the day.

StealthMode · #4 02-19-2008, 11:20 AM

Ok, got my 6800GS fully working. I installed the latest NVinject, then I proceeded to install Zephs Universal NVidia Installer, clicked only the new kexts, not the NVinject in the installer (note - I installed the latest NVinject already via terminal) then when it was all installed I went in the extensions folder added my dev id to the info.plist files, repaired permissions etc.. rebooted, applied the cpuid-graphics patcher, rebooted and boom! Everything works!!!

gaz919 · #5 02-19-2008, 11:55 AM

Ok I just finished installing and my testing.

conclusion was I couldn't boot from guid partition because the first disk always read rdisk0s2
And sofar The only way to make the first partition read as rdisk0s1 was to use mbr. at least It still has efi installed.

Maybe somebody can work out the guid install and post it.

I also noticed that during -s when booting from disk you couldn't use sudo, su or passwd .

but i found a NEAT trick, as the install on disk is in its last minute get ready for the countdown to off, as it counts down click the utilities and terminal. an now you can do you fdisk -e /dev/rdisk0 ........... and set the boot partition as active.

I also tried the AppleUpdateDone touch, but it didn't seem to work, as I still had to passwd change and su.

one major flaw is my 3800x2 only has one core in system view, im not sure if it's the 9.2 or just a flag for stability, but I think when I workout where the cpu=1 is hiding it will go back to normal.

Also Need another few fixes will prob try to load with -s on first boot next time and see if I can get around the passwd setting, and remain as root, using the TOUCH .......AppleUpdateDone.

So good luck im sure in mbr mode most should have no troubles.

If the mod could start a thread about using guid partitioning and make it a sticky we may work it out faster. It seems to have worked for some.

cgsheen · #6 02-19-2008, 12:42 PM

Quote:

[cite] WinLinMac01:[/cite]@cgsheen, are you able to see an option for making the menu bar translucent or not? Last question: I was forced to name my volume with only one word. However, in the O/S environment, I changed the name and put it back to Macintosh HD. Was this a safe thing I did?

Ya, the "check box" for "Translucent Menu Bar" is there in the "Desktop & Screen Saver" options menu in System Preferences.

I don't know how you could use both the 9.1.0 and 9.2.0 kernels... That's the guts of the whole system - everything else is built on that. You choose one of the kernels (NOT choosing 9.1 or 9.2 loads the 9.0.0 SSE2/SSE3 kernel...)

I don't know about re-naming the partition. Mine are always short and simple...

EDIT:
I've got this working well on my "2nd Zephyroth" machine - still using an external HD - specs:

2nd of 3 working installs:
Zephyroth 10.5.2 - MBR + EFI - 9.2.0
MB: Gigabyte GA-K8N51GMF-9 - nForce 6100/430 (I/O Winbond W86327) Socket 939
CPU: Athlon™ 64 X2 Dual Core Processor 4200+
Drives: 2 SATA, IDE DVD burner - Boots OSx86 from external USB, Firewire drives work
Video: Gigabyte 8600GTS 256MB PCIe ( supported natively - QE/CI )
LAN: Airlink101 AWLL3026 802.11g USB (ZyDas software for 10.4.x) onboard RTL8201 disabled
USB: 1.0 & 2.0 (supported natively & working properly)
Firewire: Onboard VIA VT6307 IEEE1394 controller (supported natively)
Audio: Onboard Realtek ALC880 - ANALOG AND DIGITAL (S/PDIF) working with AppleHDA "beta4some861_880Installer"

Toast 8.0.3 - working
MS Home & Student 2008 - working
GarageBand - needs Marvin...
Transmission 1.05 - working
Time Machine, iTunes, QuickTime, Front Row, all the built-in apps I've tried - working

This is running nice...

eard · #7 02-19-2008, 02:35 PM

I've finished the download and burned and testing :S
no good result
like with the 10.5.1 DVD i try to boot with -v and show me still waiting boot device or somethin like that
then i use -f -v and load but when i try to find my hd in disk utility dont appear, my dvd-rom doesn't appear too :S
what can i do? i wanna install this masterpiece

cya and tnx for readme

zamboo · #8 02-19-2008, 03:16 PM

@zephyroth

Firstly I would like to say thanks for your hard work let us install LEOPARD on our AMD systems.
But I have a very fameos error "still waiting for root device"

( I couldn't get installed
*JAS 10.4.8 AMD DVD
*Zepyroth 10.5.1 AMD DVD
*Zepyroth 10.5.2 AMD DVD

In all of these images I had the same problem. Could please give a way to get around this problem.
I had tried all of the combinations of HDD and DVD-RW drives, still no luck. I need despirate help

(
Is it about my chipset is so how could I pass that??
Any help appreciated guys.

My AMD spec:
Motherboard: ASUS A8N32-SLi
Chipset: nForce4 SLI
CPU: Amd Athlon 64 3200+
Ram: 512 MB DDR2 ram
Video: nVidia GeForce 6800 GT PCI-e
Hard drive: 120gb 7200RPM IDE Master (0,0)
DVD: NEC DVD writer 4551A Slave (0,1)
Hard drive: 160gb 7200RPM SATA
Onboard Sound: AC97
Ethernet: Realtek RT8139 Family PCI (built-in)

flip360 · #9 02-19-2008, 07:06 PM

Hello to all

I used this link http://forum.insanelymac.com/index.php?showtopic=36520&hl=ALC883 to instal the alc883 codec on zephyroth`s 10.5.2 release and i have audio output so far...Everything else is working great and i must say again, ZEPHYROTH THANKS MAN!!!!

zephyroth · #10 02-19-2008, 07:06 PM

Check the wiki .