Leopard 10.5.2 AMD EFI (OOTB) - Page 70

prateesh · #1 02-29-2008, 12:05 AM

Quote:

[cite] alexey_e_s:[/cite]

Quote:

[cite] cybland:[/cite]

Quote:

[cite] prateesh:[/cite]Hi,

I have downloaded & burned the DVD but when i boot from it
Its boots till the point where GUI should load and appearers
but the GUI never load it just show a light blue screen to me
I waited it for to come for some 20-25 min....

Is this normal ?? do i have to wait more !!

Hi prateesh,

Blue screen is not normal. Try to boot with -v to see what error you'll receive and than check the forum to see if there is a solution to that error.

Looks like it wants to use the other video output (external ) happends with my Q45.

Any Solution for to make it look for my laptop's default display

wongbingo · #2 02-29-2008, 12:32 PM

Quote:

[cite] eMatoS:[/cite]That's exactly the same error as mine! And I'm also booting the installation from a HD partition.
I'll try to burn a DVD and see what happens.

this is the screenshot, sorry for the painfull quality it's taken with my cellphone.

EDIT: you're right!!!! it passed that error, and then gave me another one, SAM Multimedia Error. I've checked and it's related to a bad DVD, so I'll try again, damned toast!

Hi eMatos,

I have exactly the same error as yours and still stucks at there now.
Would you pls tell me how to slove it? Thanks for your help!!!!!!!!!!

computeruser26 · #3 02-29-2008, 01:00 PM

Sorry I am new to this form. Can some one please tell me where i can find the instructions on how to install Zephyroth's leopard version on my pc

azazthot · #4 02-29-2008, 02:22 PM

Hello, people. I really need help - I feel that I am almost there.This is my specs:
Athlon 64 3000+ (sse2 only)
nforce4
via chipset
GeForce 8500GT 512mb
LAN geforce onboard
HDs:
10G IDE - Tiger (10.4.9 tubgirl - works perfect)
80G sata - Vista
200 sata -part1: Leopard
part2: empty (for backup)
Problem:
Install kernell 9.0.0 (because of sse2 only proc), EFI v8 MBR, viasata kext, nforce 2/3/4/5
nforce lan, Zeph's nvinject.
Install go perfect.First boot - kernel panic wiyh EFI.runtime - deleted
Second boot - kernel panic with intelCPUpower... - deleted
Third boot - boots fine, but hangs with grey screen and mouse pointer rolling for hours ( tried to leave overnight - still the same - just hangs)
Already tried: -x -v -f in all combinations

Please, help me to figure out what I am doing wrong and how to fix it. Thanx.

icecoolz · #5 04-26-2009, 08:42 AM

Quote:

Originally Posted by azazthot

Hello, people. I really need help - I feel that I am almost there.This is my specs:
Athlon 64 3000+ (sse2 only)
nforce4
via chipset
GeForce 8500GT 512mb
LAN geforce onboard
HDs:
10G IDE - Tiger (10.4.9 tubgirl - works perfect)
80G sata - Vista
200 sata -part1: Leopard
part2: empty (for backup)
Problem:
Install kernell 9.0.0 (because of sse2 only proc), EFI v8 MBR, viasata kext, nforce 2/3/4/5
nforce lan, Zeph's nvinject.
Install go perfect.First boot - kernel panic wiyh EFI.runtime - deleted
Second boot - kernel panic with intelCPUpower... - deleted
Third boot - boots fine, but hangs with grey screen and mouse pointer rolling for hours ( tried to leave overnight - still the same - just hangs)
Already tried: -x -v -f in all combinations

Please, help me to figure out what I am doing wrong and how to fix it. Thanx.

Hello,

I have a similar issue, my config is as follows:

AMD 64 3500+,
2GB DDR RAM
4 SATA Drives and 1 PATA drive (PATA for OSX and 1 Sata for windows XP sp3)
Nvidia 7900GT card
DFI LANPARTY ULTRA D mobo

And I am stuck exactly where he is. If anyone can help or provide any insight it would help. I also get the grey screen with the mouse and nothing happens after that.

thanks!

icecoolz · #6 04-30-2009, 06:07 PM

An update from my side. I installed once again using the same image as above, except I selected the 9.1.0 kernel, and the installation went fine. Works great. Still working on a few things such as drivers for my M-Audio Delta 1010LT. And getting the resolution to 1440 *900. Will probably need to install some extensions. Will update on this.

icecoolz · #7 05-02-2009, 07:03 AM

Update:

Most of the things work. My on-board sound card works just great. However, I am trying to get my m-audio card to work. Any hints on how to do this ? Drivers, kext etc I need to know of ?

thanks for the help!

icecoolz · #8 05-05-2009, 06:36 AM

update, I managed to install the drivers for my sound card and it works great. One question. Would the update to 10.5.6 work ? I am on 10.5.2 and hence the question. I have installed all the automatic updates except the 10.5.6 so any help will be appreciated. thanks!

lghe44 · #9 02-29-2008, 03:04 PM

Installation problem on hp presario v3159au laptop
Disk Utility works perfectly with this version, but crashed to terminal during the installation in about 2 minutes before completion, it read "ReportCrash [779]: mkdir() failed to create /Library/Logs with error: Read-only file system", can anyone give some helps?

thanks in advance!

K235 · #10 02-29-2008, 07:32 PM

Quote:

[cite] freshcuts:[/cite]I see.On MSI alc850 works. On my asus no...

Hey Freshcuts, I had the same problem with the same Motherboard as you and stumbled on a solution that made my sound work in Leopard 1.5.2:
In the bios configration disable the IEEE1394, enable the AC97 Audio BUT disable the game port and the MIDI Interrupts (AC97 = Enabled, Game Port = Disabled, MIDI Port Address = Disabled, MIDI Port IRQ = Disabled).
Once this is done, your soundcard should work with the AC97 Kexts you already modified, if not I will upload the kexts (with codecs) I installed on mine.

I hope this will help anyone with such a problem.