Ok, I'll try ;-)

roisoft, naquaada, I LOVE YOU! (not really, but nearly)
My PC is in this moment installing Leopard. I tried it at first with the Leopard DVD with VIAATA-kext, 'cause I couldn't find the "original". I booted without any flags and he detected my hd. This day is like christmas - nearly better. ;-)

Stay tuned. I'll post about my success, when the installation is complete!

:-)

I whish u luck!

---

2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64

I am happy for you crawle, welcome to the jungle!!!

Ok guys. The Installation was successful. But when I boot, and it want to boot from the hd, it says "HFs+ partition error".
What does that mean?

// rdiskXsX: you have to know the proper partition names and replace them with X.
In my case, it would rdisk1s1, first HDD, and first partition, on which leopard has been installed, which needs to be made bootable //

1 -> Launch DVD
2 -> At boot prompt, type -s (single user mode)
3 -> Type:

fdisk -e /dev/rdisk0
update
f 1
w (y)
q

4 ->
cd /usr/standalone/i386
./startupfiletool -v /dev/rdis0sX ./boot (X is your partition)

5 ->
mount -uw /
mount -t hfs /dev/disk0sX /Volumes

6 ->
bless -device /dev/disk0sX -setBoot -verbose

7 -> reboot

after that, you will fix the windows boot

boot over windows dvd

open command prompt and type

diskpart

select disk 0

list partition

select partition X (X=windows partition)

active

exit

bootrec /RebuildBCD

Add installation to boot list? (yes)

diskpart

select partition Y (Y=leopard partition)

active

exit

Hey, thanks. I'll do that.

hm, I used always fdisk -e /dev/disk1. I have two HDs in my system, the MacOS boot HD is Primary Master. The other one is a Mac Data HD, there's no Windoze.

---

2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64

I think that crawle wants a dual boot Win/Leo in the same hd