hi all
i have succed to upgraded to 10.5.3 without a kernel panic.(cuz i have change for a new sata hd).
but
now at reboot i have the grey screen with apple + the turning icon..
I have let the computer boot. 1 hour after nothing had change (still the grey apple with icon?).
any help?

Moderator notice: Moved to support, please check category before posting

---

~Asus M2N-E SLI~AMD Athlon 62 x2 3.2GHz~Palit 2 x 8800 gt 512mb~Patriot 8 GB DDR2 800MHz RAM~260GB WD SATA2~LG DVD-RW~

boot with -v option at the boot menu and tell us the last messages you get.

---

2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64

look at my image. its more simple that way. so i dont have to type

[img=http://img297.imageshack.us/img297/6497/photo141zg5.jpg]
[img=http://img297.imageshack.us/img297/6497/photo141zg5.6b19f21e3a.jpg]

I really hope it helps..

---

~Asus M2N-E SLI~AMD Athlon 62 x2 3.2GHz~Palit 2 x 8800 gt 512mb~Patriot 8 GB DDR2 800MHz RAM~260GB WD SATA2~LG DVD-RW~

I already had this PCGenUSBEHCI error, but don't remember when... Which Leopard install DVD did you use?

---

2 Opteron systems: OSx86 10.5.8, Andy's 9.8.0 kernel, Asus A8N-SLI Premium, Opteron 185 o'clocked @ 2 x 2,95 GHz (2nd system 2.6 GHz), ATI Radeon HD2600XT 256MB Dual-Monitor 2x HP L2035, 4 GB RAM, Griffin FireWave as main audio device, Marvell + nForce LAN, Asus U3S6 USB3/SATA6 card, 5,5 TB harddisk, Firewire 800 card, Apple Remote + eHome IR receiver, 2x Wacom serial graphics tablet, Canon Pixma iP4700, Logitech Internet Navigator wireless keyboard/mouse combination.

My Audio stuff: M-Audio Transit USB (default audio), M-Audio ProFire 610, M-Audio ProFire Lightbridge (34 channels) using Creamware A16 ADAT converter • MIDI: M-Audio Midiman 4x MIDI interface • Behringer Audio Mixers: Xenyx 1002, Xenyx 1002FX, Xenyx 1202FX, Eurorack UB1002FX, Eurorack MX1804FX, Eurorack MX262A • FX devices: Lexicon MPX100 DSP, Behringer DSP-1000 Virtualizer, Behringer MiniFEX 800 DSP, Behringer Multicom Pro MDX4400 compressor • RETRO: MSSIAH midi/sequencer/synthesizer cardridge for the C64 (Dual-SID), Steinberg M.S.I. MIDI Interface for C64

zephyroth 10.5.2 version2.

---

~Asus M2N-E SLI~AMD Athlon 62 x2 3.2GHz~Palit 2 x 8800 gt 512mb~Patriot 8 GB DDR2 800MHz RAM~260GB WD SATA2~LG DVD-RW~

looks like you have applenforceata installed twice on the disc or on the hd

AppleNForceATA loads every time a SATA port is found. a physical reset is done for every port. on my board it does this four times... this doesn't mean that AppleNForceATA is installed four times, just that I have four ports in use.

---

i have 2 sata2 drive
1-xp
2-test for linux or hackintosh

---

~Asus M2N-E SLI~AMD Athlon 62 x2 3.2GHz~Palit 2 x 8800 gt 512mb~Patriot 8 GB DDR2 800MHz RAM~260GB WD SATA2~LG DVD-RW~

I know that

mine says it alot too

but when i was trying to get a distro to work with my comptuer i messed up and put two applenforce ata inside the iso before i burned it and i got the same error he is getting because in zeph first release the appleNforcATA is install inside another kext and i didn't know it

Well I didn't use Zeph's second release so I don't know if there are two AppleNForceATA kexts installed. To be fair though, when I was a noob and knew it only had to be placed in IOATAFamily, I placed it directly in the Extensions folder and the IOATAFamily>Contents>Plugins folder because I was receiving conflicting views on where it had to be placed... yet I've never had this error. All I'm saying is I don't know if it is because of that. Its worth looking into though. Where does PCGenUSBEHCI come in to play? and what does the rest of the line above the yellowed text say? "kmod_control/start... PCGenUSBEHCI; dest"... destination what?

---