InfiniteMac OSx86  


Reply
 
Thread tools Display modes
  #1  
Old 12-19-2009, 10:59 PM
Imkantus Imkantus is offline
 
Join Date: Jul 2009
Location: Germany
Posts: 779
BCM4318 [AirForce One 54g] (rev 02) not working on Snow Leopard

Hey folks,

I need some help with this PCI NIC:
Code:
04:00.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
It has been working out of the box on my old 10.5 Leopard install, so I applied it again since I can't longer use wired network...
But it was not regognized. Even the corresponding Kernel Extensions wasn't loaded, so I tried with using this script by mcsmart - but still no luck.
Since I applied this, kextstsat shows this:
Code:
   74    0 0x34fb0000 0x1a8000   0x1a7000   com.apple.driver.AirPortBrcm43xx (411.91.20) <73 72 14 7 5 4 3 1>
But there is still no network device avaible.

I hope someone has an idea...

AMD Phenom II X4 955 - ASRock AM3A770DE - 8GB DDR3-1333 - Radeon HD 5570 1GB passiv - BCM4318 802.11b/g - Snow Leopard Retail
+++
AMD Phenom X3 8450 - ASRock AM2NF6G-VSTA (BIOS L2.39) - 4GB DDR2-800 - Radeon HD 4650 512MB - Snow Leopard Retail (retired) / OpenBSD
Reply With Quote
  #2  
Old 02-15-2010, 01:56 AM
teqtonix teqtonix is offline
Cheetah
 
Join Date: Feb 2010
Posts: 3
Same problem

Did you happen to find a solution to the bcm4318 problem. I have tried everything and I just can't figure it out.

Thanks in advance
Reply With Quote
  #3  
Old 02-15-2010, 03:08 PM
Imkantus Imkantus is offline
 
Join Date: Jul 2009
Location: Germany
Posts: 779
Yep solved it - embarrassingl; I just had to get a stronger power supply unit.

AMD Phenom II X4 955 - ASRock AM3A770DE - 8GB DDR3-1333 - Radeon HD 5570 1GB passiv - BCM4318 802.11b/g - Snow Leopard Retail
+++
AMD Phenom X3 8450 - ASRock AM2NF6G-VSTA (BIOS L2.39) - 4GB DDR2-800 - Radeon HD 4650 512MB - Snow Leopard Retail (retired) / OpenBSD
Reply With Quote
  #4  
Old 02-17-2010, 01:33 AM
teqtonix teqtonix is offline
Cheetah
 
Join Date: Feb 2010
Posts: 3
?

you had to replace the power supply for you computer.. and it just worked? Sorry I've been running Leopard on my Dell for the past 2 years, and I can usually trouble shoot problems and solve them on my own.. but what does replacing the power supply have to do with the OS not recognizing the wireless card? I'm confused now.

Sorry for all the questions,

Thanks again for the help.
Reply With Quote
  #5  
Old 02-20-2010, 08:00 PM
teqtonix teqtonix is offline
Cheetah
 
Join Date: Feb 2010
Posts: 3
Fixed it

There was something wrong with my DSDT.aml I replaced it with a different one and now everything is working fine.
Reply With Quote
  #6  
Old 02-22-2010, 02:49 PM
Imkantus Imkantus is offline
 
Join Date: Jul 2009
Location: Germany
Posts: 779
Quote:
Originally Posted by teqtonix View Post
you had to replace the power supply for you computer.. and it just worked?
Well basically yes as I was still using some 350W ATX 2.0 one (20 Pin Mobo supply on 24 Pin board) - what must have been the main reason for my wifi card not to work. I just had that idea, when I was trying to set up the wifi on Linux without having the kernel module beeing loaded, alltough the firmware was present in /lib

Quote:
Originally Posted by teqtonix View Post
There was something wrong with my DSDT.aml I replaced it with a different one and now everything is working fine.
I can confirm that. The BCM4318 PCI NIC for some reason works only without having Device (HPET) in DSDT.... Wherefore I am currently either without having Speedstep & Sleep or without having wireless (If someone has an idea / is able to fix that - let me know...) - but I haven't realy thaught about that issue in your case - sorry about that...

AMD Phenom II X4 955 - ASRock AM3A770DE - 8GB DDR3-1333 - Radeon HD 5570 1GB passiv - BCM4318 802.11b/g - Snow Leopard Retail
+++
AMD Phenom X3 8450 - ASRock AM2NF6G-VSTA (BIOS L2.39) - 4GB DDR2-800 - Radeon HD 4650 512MB - Snow Leopard Retail (retired) / OpenBSD
Reply With Quote
  #7  
Old 04-20-2010, 05:20 AM
JaS JaS is offline
Cheetah
 
Join Date: Apr 2010
Posts: 10
Quote:
Originally Posted by Imkantus View Post
Well basically yes as I was still using some 350W ATX 2.0 one (20 Pin Mobo supply on 24 Pin board) - what must have been the main reason for my wifi card not to work. I just had that idea, when I was trying to set up the wifi on Linux without having the kernel module beeing loaded, alltough the firmware was present in /lib


I can confirm that. The BCM4318 PCI NIC for some reason works only without having Device (HPET) in DSDT.... Wherefore I am currently either without having Speedstep & Sleep or without having wireless (If someone has an idea / is able to fix that - let me know...) - but I haven't realy thaught about that issue in your case - sorry about that...
I have HPET fixed in my dsdt along with a few other fixes, just wanted to post that under 10.6.3 My Dynex PCI Wifi Card is working

Kextstat

com.apple.driver.AirPortBrcm43xx (422.91.27)

lspci output -nvvn

Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
Subsystem: Belkin Unknown device [1799:7c0a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbefe000 (32-bit, non-prefetchable)
Attached Images
File Type: png Screen shot 2010-04-20 at 12.19.15 AM.png (22.5 KB, 17 views)

Last edited by JaS; 04-20-2010 at 05:52 AM.
Reply With Quote
  #8  
Old 04-20-2010, 10:57 AM
Imkantus Imkantus is offline
 
Join Date: Jul 2009
Location: Germany
Posts: 779
Hi JaS,

Nice to see you here & thanks for your response.

But well this does no longer realy matter to me, since one of the carriers droped the box with my Gigabyte/Intel rig, when I was moving to a new place, about a week ago.
Since that I am back on the AMD side of life & hey everythings working fine & smoothly...

Thank god I was collecting all the bills, so I am going to get my iPad next month using the insurance sum I received.

AMD Phenom II X4 955 - ASRock AM3A770DE - 8GB DDR3-1333 - Radeon HD 5570 1GB passiv - BCM4318 802.11b/g - Snow Leopard Retail
+++
AMD Phenom X3 8450 - ASRock AM2NF6G-VSTA (BIOS L2.39) - 4GB DDR2-800 - Radeon HD 4650 512MB - Snow Leopard Retail (retired) / OpenBSD
Reply With Quote
  #9  
Old 04-20-2010, 01:17 PM
JaS JaS is offline
Cheetah
 
Join Date: Apr 2010
Posts: 10
Quote:
Originally Posted by Imkantus View Post
Hi JaS,

Nice to see you here & thanks for your response.

But well this does no longer realy matter to me, since one of the carriers droped the box with my Gigabyte/Intel rig, when I was moving to a new place, about a week ago.
Since that I am back on the AMD side of life & hey everythings working fine & smoothly...

Thank god I was collecting all the bills, so I am going to get my iPad next month using the insurance sum I received.
too bad about the rig but nice to turn it around into an iPad congrats and enjoy !

MotherBoard: Asus P6T
CPU: Intel Core i7 920 2.67GHz Stepping: D0
RAM: 6.0GB Speed: 1.6 GHz Type: DDR3
Disk: 4.11TB
Display: ATI Radeon HD 5770 (PCIe x16) [1024MB/QE/Q2DE/QGL/CI/OCL]
Audio: Apple HDA
Network: AirPort ( AirForce one 54g )
OS: Mac OS X 10.6.4 (10F569)
Kernel: Darwin 10.4.0 Arch: 64-bit
Reply With Quote
Reply