#251
|
|||
|
|||
Actually, I just got it working with voodoohda 2.56. I had tried 2.60 or 2.61 (forget which, whichever one is in MultiBeast) and it didn't work at all. It made one of the SMC kexts KP on boot. Anyway I'm pretty happy with 2.56. Sound in and all that works great. Hopefully I can figure out how to make a disabler for AppleHDA so I don't have to carefully remove it in the future. Or, hopefully a future AppleHDA will support ALC892.
Now for power management... Maybe I'll sneak into a place that sells Mac Pros with a thumb drive and copy the power management kexts when no one is looking. |
#252
|
|||
|
|||
Hi airwalk776 and msinfo_us,
Thank you guys so much for all the works! I've managed to get sleep working with the files attached on page 24. But I noticed that the usb ports of my computer wouldn't work after waking up. I can actually wake up the computer by clicking mouse or pressing the power button, but once the computer is back on, the usb no longer works. I used my usb flash drive to test it, it seemed that the usb had no power after waking up. Also, how should I set up the power management in the bios? I'm now using S3 with HPET 64bit enabled. It seems OK to me except for the usb issue. Do you guys know how to fix it? Thanks again! |
#253
|
|||
|
|||
I'm having one other problem: System Profiler is reporting my graphics as x8. I only have one card (EVGA GTX 260) and it's in the first slot, although I do have a firewire card in the third full length slot.
|
#254
|
|||
|
|||
Quote:
You can try the following fix for your USB: Change ID of USB devices to fake ICH10-R. Device (USB0) { Name (_ADR, 0x001D0000) ... Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x34, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Device (USB1) { Name (_ADR, 0x001D0001) ... Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x35, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Device (USB2) { Name (_ADR, 0x001D0002) ... Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x36, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Device (USB4) { Name (_ADR, 0x001A0000) ... Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x37, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Device (USB5) { Name (_ADR, 0x001A0001) ... Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x38, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Device (USB6) { Name (_ADR, 0x001A0002) ... Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x39, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Please let us know if it worked for you and if not I think there is one more fix we can try. Quote:
BTW I have the same EVGA GTX 260 video card so you can try my GFX string to see if it will fix it (look at my com.boot.apple on page 24). Last edited by msinfo_us; 09-27-2010 at 09:08 PM. |
#255
|
|||
|
|||
Quote:
|
#256
|
|||
|
|||
Yeah I tried taking out the firewire card and it's still reporting as x8. I had the same card in my old EP45-DS3L using GraphicsEnabler=yes and it showed as x16 on there. Maybe I need to reset my bios?
|
#257
|
|||
|
|||
Cool. Please let us know results. I've got no way to test this right now (I am at work) but to make it easer for you I compiled device (USBx) section for you to try. You should be able to just copy/paste and give it a shot. GL
Device (USB0) { Name (_ADR, 0x001D0000) Method (_S3D, 0, NotSerialized) { If (LEqual (OSFL, 0x02)) { Return (0x02) } Return (0x03) } Name (_PRW, Package (0x02) { 0x03, 0x03 }) Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x34, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Device (USB1) { Name (_ADR, 0x001D0001) Method (_S3D, 0, NotSerialized) { If (LEqual (OSFL, 0x02)) { Return (0x02) } Return (0x03) } Name (_PRW, Package (0x02) { 0x04, 0x03 }) Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x35, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Device (USB2) { Name (_ADR, 0x001D0002) Method (_S3D, 0, NotSerialized) { If (LEqual (OSFL, 0x02)) { Return (0x02) } Return (0x03) } Name (_PRW, Package (0x02) { 0x0C, 0x03 }) Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x36, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Device (USB3) { Name (_ADR, 0x001A0000) Method (_S3D, 0, NotSerialized) { If (LEqual (OSFL, 0x02)) { Return (0x02) } Return (0x03) } Name (_PRW, Package (0x02) { 0x0E, 0x03 }) Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x37, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Device (USB4) { Name (_ADR, 0x001A0001) Method (_S3D, 0, NotSerialized) { If (LEqual (OSFL, 0x02)) { Return (0x02) } Return (0x03) } Name (_PRW, Package (0x02) { 0x05, 0x03 }) Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x38, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } Device (USB5) { Name (_ADR, 0x001A0002) Method (_S3D, 0, NotSerialized) { If (LEqual (OSFL, 0x02)) { Return (0x02) } Return (0x03) } Name (_PRW, Package (0x02) { 0x20, 0x03 }) Method (_DSM, 4, NotSerialized) { Store (Package (0x02) { "device-id", Buffer (0x04) { 0x39, 0x3A, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } |
#258
|
|||
|
|||
I checked and my card def shows as PCIe x16. The only setting in BIOS I use Video related is video card = PCIe instead of PCI. Everything else in that section as default. Can you tell a little bit more about your system? Bios version, r u using same dsdt posted on page 24, kexts, GFX string, which bootloader, any other cards?
|
#259
|
|||
|
|||
I reset my bios and it still says x8.
There's only one bios for the SLI 3, and thats 74 I believe. I've got C2RC5 as the bootloader and graphicsenabler=yes (no strings or anything) I'm not using the DSDT from page 24, but I suppose I'll give it a try. I've got these extensions in /E/E AHCIPortInjector fakesmc IOAHCIBlockStorageInjector JMicronATA NullCPUPowerManagement OpenHaltRestart PlatformUUID SleepEnabler and then in /S/L/E I have VoodooHDA Everything else is stock. I had a firewire card in the third x16/x8 slot at first, but I took it out and like I said it still says x8 after resetting the bios too. No other cards installed. I'll give that page 24 DSDT a shot. |
#260
|
|||
|
|||
Quote:
💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. |