 |
|
#71
11-12-2009, 06:29 PM
|
||||
|
||||
|
Muchos Gracias Hombre
Installing right away. Update: working perfectly after rebuilding Aggregate device bro, thx again Snow Leopard 10.6.7 Gigabyte GA-P35-DS3P Intel Q6600 @ 3Ghz Corsair CM2X2048-6400DHX Gigabyte HD5770 Silent Cell Samsung SyncMaster 2494SW ALC889a Creative T5400 5.1 Maxtor 380215AS Pioneer DVR-215D Presonus Inspire 1394 KRK Rokit 5 Wacom Bamboo One SL USB Guide => http://www.infinitemac.com/f57/guide...k-drive-t3705/ Last edited by Snow; 11-12-2009 at 06:46 PM. 
|
|
#72
11-15-2009, 01:38 AM
|
|||
|
|||
|
thx for the info
Code:
Last edited by xxxslayeriiixxx; 11-15-2009 at 01:59 AM.
|
|
#73
11-15-2009, 02:59 PM
|
|||
|
|||
|
OMG! it works!
Hi guys,
i got ALC262 (VAIO FW139E/H), confirming that this work! BTW i have installed the following kext as well: ALCInject.kext and HDAEnabler.kext. Thank you very much mormegil! atleast my sound works, though i have no mic and HDMI output but hey its better than none. 
|
|
#74
11-15-2009, 08:51 PM
|
|||
|
|||
|
p6860fx laptop no sound still :(
Could someone please help me? I own a gateway p6860fx laptop. I followed this excellent guide in attempts to get my sound working. I hex edited the applehda using B0 76 1D 11 which matches the Subsystem Id from the codec#1 in this below linux audio dump. It also matches the Vendor ID from the codec#2 linux dump below.
I have pasted my linux dump and DSDT audio patch. Could someone please advise me to maybe why my audio still doesn't work. Sound was fine in Leopard and I modified a Vanilla Snow AppleHDA kext per the guide here. Thanks in advance!! Linux Dump: Code:
Codec: LSI ID 1040
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x107b0690
Revision Id: 0x100200
Modem Function Group: 0x1
Codec: IDT 92HD71B8X
Address: 2
Vendor Id: 0x111d76b0
Subsystem Id: 0x107b0692
Revision Id: 0x100101
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=8, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Power-Map: 0x01
Analog Loopback: 0x00
Node 0x0a [Pin Complex] wcaps 0x400183: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x0321101f: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Connection: 3
0x10 0x11* 0x17
Node 0x0b [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x00001724: IN Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x03a11020: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Node 0x0c [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x00001724: IN Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x40f000f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Node 0x0d [Pin Complex] wcaps 0x400183: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000014: OUT Detect
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 3
0x10* 0x11 0x17
Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x00001724: IN Detect
Vref caps: HIZ 50 GRD 80
Pin Default 0x40f000f1: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x1
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Node 0x0f [Pin Complex] wcaps 0x400183: Stereo Amp-In
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Pincap 0x00000014: OUT Detect
Pin Default 0x40f000f2: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x2
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Connection: 3
0x10 0x11 0x17*
Node 0x10 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0x64 0x64]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x11 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0x7f 0x7f]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x12 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D3, actual=D3
Delay: 13 samples
Connection: 1
0x1c
Processing caps: benign=0, ncoeff=0
Node 0x13 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D3, actual=D3
Delay: 13 samples
Connection: 1
0x1d
Processing caps: benign=0, ncoeff=0
Node 0x14 [Pin Complex] wcaps 0x400102: Mono Amp-In
Amp-In caps: N/A
Amp-In vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x40f000f3: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x3
Pin-ctls: 0x00:
Connection: 1
0x16
Node 0x15 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x10* 0x11 0x17
Node 0x16 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x15
Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
Connection: 5
0x10 0x11 0x27 0x1a 0x1b
Node 0x18 [Pin Complex] wcaps 0x40000d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x90a6012e: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x19 [Pin Complex] wcaps 0x40000d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x40f000f5: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x5
Pin-ctls: 0x20: IN
Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 3
0x0b* 0x0c 0x0e
Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 3
0x0b* 0x0c 0x0e
Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x09 0x09]
Connection: 4
0x1a* 0x17 0x18 0x19
Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 4
0x1b* 0x17 0x18 0x19
Node 0x1e [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x044513a0: [Jack] SPDIF Out at Ext Right
Conn = Optical, Color = Black
DefAssociation = 0xa, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Connection: 1
0x24
Node 0x1f [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x00010010: OUT EAPD
EAPD 0x0:
Pin Default 0x40f000f8: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x8
Pin-ctls: 0x00:
Power: setting=D0, actual=D0
Connection: 2
0x24* 0x25
Node 0x20 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x90451360: [Fixed] SPDIF Out at Int N/A
Conn = Optical, Color = Black
DefAssociation = 0x6, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x25
Node 0x21 [Audio Output] wcaps 0x40211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Node 0x22 [Audio Output] wcaps 0x40211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Node 0x23 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x24 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x21* 0x1c 0x1d
Node 0x25 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x22* 0x1c 0x1d
Node 0x26 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x00]
Node 0x27 [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x40f000f7: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x7
Pin-ctls: 0x00:
Node 0x28 [Volume Knob Widget] wcaps 0x600000: Mono
Volume-Knob: delta=1, steps=127, direct=1, val=127
Connection: 2
0x10 0x11
Code:
Device (HDEF)
{
Name (_ADR, 0x001B0000)
Method (_DSM, 4, NotSerialized)
{
Store (Package (0x06)
{
"codec-id",
Buffer (0x04)
{
0xB0, 0x76, 0x1D, 0x11
},
"layout-id",
Buffer (0x04)
{
0x0C, 0x00, 0x00, 0x00
},
"PinConfigurations",
Buffer (Zero) {}
}, Local0)
Return (Local0)
}
}
Gateway P6860FX Laptop 8800M GTS 512mb Last edited by chadp1a; 11-16-2009 at 01:38 AM.
|
|
#75
11-18-2009, 02:38 PM
|
|||
|
|||
|
Thanks, mormegil, your AppleHDA kext works well in my system (EP35-DS3r with ALC889a).
I attach a AppleHDA.kext > Contents > Resources > Spanish.lproj folder to include into the kext for anybody who likes to see device names in spanish instead of english. Thanks again. 10.7.1 / Gigabyte P55-USB3 / i5 750 / 9800gt / http://miliuco.es Last edited by miliuco; 11-20-2009 at 03:45 PM.
|
|
#76
11-19-2009, 12:16 PM
|
|||
|
|||
|
Hi,
I can't get this to work, I've spent hours and hours trying :/ I have a Foxconn Blackops with ALC885. Patched DSDT as such: Code:
Device (HDEF)
{
Name (_ADR, 0x001B0000)
Method (_PRW, 0, NotSerialized)
{
Return (Package (0x02)
{
0x0D,
0x05
})
}
Method (_DSM, 4, NotSerialized)
{
Store (Package (0x0A)
{
"built-in",
Buffer (0x01)
{
0x01
},
"codec-id",
Buffer (0x04)
{
0x85, 0x08, 0xEC, 0x10
},
"layout-id",
Buffer (0x04)
{
0x0C, 0x00, 0x00, 0x00
},
"device-type",
Buffer (0x011)
{
"ALC885"
},
"PinConfigurations",
Buffer (0x28)
{
/* 0000 */ 0x10, 0x40, 0x01, 0x01, 0x64, 0x10, 0x01, 0x01,
/* 0008 */ 0x71, 0x60, 0x01, 0x01, 0x82, 0x20, 0x01, 0x01,
/* 0010 */ 0x30, 0x90, 0xA1, 0x01, 0x20, 0x90, 0xA1, 0x02,
/* 0018 */ 0x40, 0x30, 0x81, 0x01, 0x50, 0x40, 0x21, 0x02,
/* 0020 */ 0xF0, 0x71, 0x44, 0x01, 0x90, 0x71, 0x45, 0x11
}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
}
}
Layout ID is correct (12) for ALC885 in both DSDT and plists. On boot I always get: Code:
Nov 19 11:04:04 localhost kernel[0]: Sound assertion "0 != setupHostInterrupt ()" failed in "/SourceCache/AppleHDA/AppleHDA-179.1.4/AppleHDAController/AppleHDAController.cpp" at line 312 goto Exit Working Leopard kext plist: http://82.113.155.91/leopard-info.plist Hacked SL plists: AppleHDAHardwareConfigDriver-info.plist AppleHDAPlatformDriver-info.plist edit: fixed links! If anyone can give me a clue as to where I might be going wrong I'd be very grateful, this is driving me nuts :/ I can get sound with VoodooHDA but only through the headphone socket, no lineout :/ Thanks! Last edited by mimayin; 11-19-2009 at 12:28 PM.
|
|
#77
11-19-2009, 01:01 PM
|
|||
|
|||
|
Tried adding HDAEnabler.kext to /Extra/Extensions as a potshot but it still fails.
Code:
Nov 19 11:57:34 localhost kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl Nov 19 11:57:34 localhost kernel[0]: HDAEnabler: 05/05/2008 Added SPAudio support:Taruga Nov 19 11:57:34 localhost kernel[0]: HDAEnabler: Copyright (c) 2008 by Kabyl Nov 19 11:57:34 localhost kernel[0]: HDAEnabler: 05/05/2008 Added SPAudio support:Taruga Nov 19 11:57:34 localhost kernel[0]: Sound assertion "0 != setupHostInterrupt ()" failed in "/SourceCache/AppleHDA/AppleHDA-179.1.4/AppleHDAController/AppleHDAController.cpp" at line 312 goto Exit Nov 19 11:57:34 localhost kernel[0]: Sound assertion ""ERROR: EFI ROM did not publish 'hda-gfx' associative property!\n"" failed in "/SourceCache/AppleHDA/AppleHDA-179.1.4/AppleHDA/AppleHDACodecGeneric.cpp" at line 331 goto ExitError
|
|
#78
11-19-2009, 02:19 PM
|
|||
|
|||
|
Device (HDEF) code should be just this: http://www.infinitemac.com/f57/guide...post35175.html
Your plist looks fine. Only thing is the configdata in the first plist doesn't match the one in your dsdt. Try them both but only in plist. DO NOT have it in your dsdt. Core2Quad / MSI P45 Neo2-FR / HD4870 / Snow Leopard
|
|
#80
11-19-2009, 10:15 PM
|
|||
|
|||
|
Still not working
 Pretty sure DSDT is correct now:Code:
Device (HDEF)
{
Name (_ADR, 0x001B0000)
Method (_DSM, 4, NotSerialized)
{
Store (Package (0x04)
{
"layout-id",
Buffer (0x04)
{
0x0C, 0x00, 0x00, 0x00
},
"PinConfigurations",
Buffer (Zero) {}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
}
}
Any ideas? kext plists are unchanged from my first post 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers.
|
Linear Mode
