![]() |
#11
|
||||
|
||||
No, that Super is glitched. Ive read in numerous places that its not a 64 bit (true) kext.
The issue I got while I had it installed was: FEDE genero 32 IOVMSegments (I think; ) it was hard to see as it was scrolling past the screen rapidly in a seemingly endless loop (I waited 30 mins). That 32 in there is what I think drew people to the conclusion about it not being 64 bit. The one Im using is http://www.insanelymac.com/forum/ind...howtopic=77071 here. System: M2N Plus SLI, Hazard 10.6.2 Video: NVIDIA GeForce 9600 (512MB- NVEnabler) Processor: AMD Athlon Dual Core 6000+ ~3.2Ghz Ram: 4GB (800mhz DDR2); Audio : Realtek (Voodoo HDA) Disk 0 - 500 GB WDC (SATA; Snow 10.6.2- LegacySata) Disk 4 - DVD-DL (Sata) Network: Nforce 5 (RTL8169) ![]() |
#12
|
||||
|
||||
[Solved]
W00T! Got QE/CI working, monitor to shut off via hotcorners, and the screen saver to quit crashing the system! It even detected my monitor type (Kristel 19)! All I needed was to get my card stats from EFI studio and post into smbios plist. I thought I had done this already but I reinstalled probably 6 or more times yesterday.
So; for anyone who has my system specs and is trying to install SL, heres your fixes: Follow SaCleoCheaters Guide http://www.infinitemac.com/f57/how-t...on-a-pc-t3137/ Before you reboot for the first time, while still in Leo; some additionals: Make sure you insert the hex value for your video card into the com.apple.boot.plist Delete /System/Library/Extensions/AppleIntelCPUPowerManagement.kext (You should have already copied NullCPUPowerManagement.kext in there) Copy the AppleNForceAta.kext from the attachment to your extensions (Snow Drive), if you need Sata support. *I do not recommend using the SuperAppleNForceAta floating around- it didnt work for me, and others. If you have the same MB as me, then you will need to copy nForceLan2.kext from the attachment to your extensions- this allows the onboard Lan to work. Now that all that's done, type the following into terminal- *Change /Snow/ to be whatever you named your snow leopard drive*: sudo -s (enter your password) chown -R root:wheel /Volumes/Snow/System/Library/Extensions chmod -R 755 /Volumes/Snow/System/Library/Extensions Reboot Guess what? You should now have a working SL!! Sweet! My only remaining issue is that Snow isnt listed under Chameleon Rc3, I have to select it. Only my iHack drive shows up until I press -> key. I honestly couldnt have done it without the following people: SaCleoCheater Nikola M (SeaGhost) scififan68 Thanks guys! System: M2N Plus SLI, Hazard 10.6.2 Video: NVIDIA GeForce 9600 (512MB- NVEnabler) Processor: AMD Athlon Dual Core 6000+ ~3.2Ghz Ram: 4GB (800mhz DDR2); Audio : Realtek (Voodoo HDA) Disk 0 - 500 GB WDC (SATA; Snow 10.6.2- LegacySata) Disk 4 - DVD-DL (Sata) Network: Nforce 5 (RTL8169) ![]() |
#13
|
|||
|
|||
So many thanks ! That's work for me
![]() |
#14
|
||||
|
||||
Hopefully this will help others, too.
![]() Im still loving my SL. System: M2N Plus SLI, Hazard 10.6.2 Video: NVIDIA GeForce 9600 (512MB- NVEnabler) Processor: AMD Athlon Dual Core 6000+ ~3.2Ghz Ram: 4GB (800mhz DDR2); Audio : Realtek (Voodoo HDA) Disk 0 - 500 GB WDC (SATA; Snow 10.6.2- LegacySata) Disk 4 - DVD-DL (Sata) Network: Nforce 5 (RTL8169) ![]() |
#15
|
||||
|
||||
whats the deal with nforcelan2?
how is that different ? |
#16
|
||||
|
||||
Youd have to recompile it to be sure, but there is something different about it... I dont know. All I know is that the first nforce LAN didn't work for me, but that one did -which I found on an alternate site (cant remember which, now); thus the attachment.
💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. System: M2N Plus SLI, Hazard 10.6.2 Video: NVIDIA GeForce 9600 (512MB- NVEnabler) Processor: AMD Athlon Dual Core 6000+ ~3.2Ghz Ram: 4GB (800mhz DDR2); Audio : Realtek (Voodoo HDA) Disk 0 - 500 GB WDC (SATA; Snow 10.6.2- LegacySata) Disk 4 - DVD-DL (Sata) Network: Nforce 5 (RTL8169) ![]() Last edited by HardRom; 11-03-2009 at 12:47 AM. |