|
Hello, I am having lots of problems with Zephyroth's 10.5.2 for AMD.
First problem: When I don't boot the DVD with -v or -x it appears an apple logo and it stays there forever... Here is an image: http://img369.imageshack.us/img369/6364/issueffld6.jpg It doesn't have the loading circle as you can notice. Second problem: When I boot with -v it stays there forever, the last code it says in the black screen is: ACPI_SMC_CtrlLoop : : iniyCPUCtrlLoop - pmCPUControl (PMIOCSETPSTATETABLE) returned 0x42fcf00 Here is an image: http://img170.imageshack.us/img170/1903/dsc00852mi0.jpg My computer: My laptop is a Toshiba Satellite A215-S4767, SSE 3 it has 2 gb ram, AMD turion 64x2 Dual Core Mobile Technology, 250 gb HDD + 80 gb HDD (external), ATI Radeon X1200, 54g Atherols Wi-Fi (802.11b/g); 10/100 Ethernet; 4 USB, 1 FireWire, 1 VGA, 1 S-Video, 1 ExpressCard 34/54. 5-in-1 memory card reader, Realtek High Definition Audio ALC268 Any suggestions??? Thanks everyone... |
any help will be appreciated!
|
check your bios settings, you may need to turn off the cool and quiet type acpi speed step system, don't worry though as it is software controlled now
|
but how do i turn it off, where do i need to go on bios?
|
under cpu setting, sorry you will have to look around a bit as all bios are different
|
but does it actually says ACPI? because /I have searched and I didnt find anything that sid ACPI
|
No for my amd its called cool and quiet, its next to the hypertransport settings
I use a X2 Dual Core not a laptop, but Im sure the turions will have something similar Good Luck |
I have an Acer Aspire 5520-5912 and I boot up the Leopard Install DVD and it goes through but when I want to partition my hard drive it doesn't detect anything. Can anyone help me with this issue. Thanks in advanced.
|
help me please guys, it doesnt anything cool and quiet nethier hypertransport...
|
help
|
be aware that Mac OSX is NOT written for AMD processors, thus everything is Intel's way. =)
Quote:
|
how did you get Mac OSX then?
|
Quote:
|
VyperX. Mac osx has been hacked by the osx86 community to work with AMD systems. And if you have the same A215 that I have, the only option you have comparable to the cool and quiet technology is the Dynamic Cpu setting. You should set it to limited.
It would seem as you are a bit new to the OSX86 project. Have you visited the Wiki? I think it may answer some of your questions. |
A_DoNuT333, I didn't find anything about Dynamic Cpu setting, do you where is it, it is not in my BIOS so...?
Thanks.. |
I didn't find anything about Dynamic Cpu setting, do you where is it, it is not in my BIOS so...?
Thanks.. |
I cannot get to the installer tho
|
I didn't find anything about Dynamic Cpu setting, do you where is it, it is not in my BIOS so...?
|
Well I can tell you that in my bios settings it is under the "Advanced" tab in bios.
|
Please help
Hello all, i cant get my computer to boot more then 5 seconds after i put the 10.5.2 r2 disc in. it tell me to hit any key to continue or F8. when i do any key it just loads then goes to the grey apple screen for hours when i do-v it loads for a second then freezes for hours Mainboard is Motherboards MSI K8NGM2-FID nVidia GeForce 6150 Chipset AMD Athlon 64 3500+ Venice processor IDE DVD-Rom (2) SATA HHD 500GB and 250GB On Board LAN and Graphics Sound Blaster X-Fi Sound card USB Mouse and Keyboard I am try to install the OS X on the entire 250GB SATA HHD Thanks, |