InfiniteMac OSx86  


Reply
 
Thread tools Display modes
  #1  
Old 09-07-2008, 07:09 PM
itlbok333 itlbok333 is offline
Cheetah
  
Join Date: Sep 2008
Posts: 4
Dual boot ok, need help with launching MAC
So the install went good, I used EasyBCD and now see : Vista and Mac to select from on boot, however when I select Mac I can not boot into it, this is the screen it stays at:

use up or down to select startup volume

hd(1,1) MAC

press enter to startup with Darwin/x86 with no options, or you can : type -v and press enter etc etc etc

No matter what I do it does not go past this screen. Any help would be appreciated

Vista on one hard drive, and Mac is installed on a sepparate harddrive, Hp Laptop DV9740US
Reply With Quote
  #2  
Old 09-07-2008, 07:15 PM
Voyn1x's Avatar
Voyn1x Voyn1x is offline
 
Join Date: Jan 2008
Location: United Kingdom
Posts: 554
Did it used to boot fine before using EasyBCD?
Reply With Quote
  #3  
Old 09-07-2008, 07:19 PM
itlbok333 itlbok333 is offline
Cheetah
  
Join Date: Sep 2008
Posts: 4
no, I have not booted Mac after installing yet.
Reply With Quote
  #4  
Old 09-08-2008, 12:25 AM
milanca's Avatar
milanca milanca is offline
 
Join Date: Jan 2008
Location: Serbia and Montenegro
Posts: 326
Probably that partion with osx installed was not set active, cause you could have logged into osx just by selecting hdd boot order from your bios.
You can boot with your leopard dvd to fix that. Follow this link, its all explained here:
http://forum.insanelymac.com/index.php?showtopic=22844
Last edited by milanca; 09-08-2008 at 12:29 AM.
Reply With Quote
Reply



Archive - Privacy - Top