#1
|
|||
|
|||
iatkos 7 problem. need some help if possible
Hello,
Just a quick note before i start: i am a complete newbie when it comes to macs but wanted to see what os x was like. so i looked around and downloaded iatkos v7. checksums: CRC-32: ccc9a803 MD4: 0fed2a973984f11a840fe5ff44349fc5 MD5: 6395be5253f53f716ed042db1dd599f3 SHA-1: 4712b9a9354e3591974cfd3c6a453cec1157e5a5 i hope this is the official release as i could not find the official checksums to check. I am using this old pc that I had under my bed. which could be why this aint working lol. PC information using everest ultimate: --------[ Summary ]----------------------------------------------------------------------------------------------------- Computer Type ACPI x86-based PC CPU Type AMD Sempron, 2000 MHz (10 x 200)3300+ Motherboard Name Abit NF8 Series Motherboard Chipset nVIDIA nForce3 250, AMD Hammer System Memory 1536 MB (DDR SDRAM) DIMM1: Corsair Value Select VS1GB400C3 1 GB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) DIMM2: 64MX64U-33B 512 MB PC2700 DDR SDRAM (2.5-3-3-7 @ 166 MHz) (2.0-3-3-6 @ 133 MHz) BIOS Type Award (06/14/05) Communication Port Communications Port (COM1) Communication Port Printer Port (LPT1) Display: Video Adapter NVIDIA GeForce FX 5200 (256 MB) Monitor Samsung SyncMaster 911N/920N(x)/MagicSyncMaster CX918N [19" LCD] (HMCL307218) Storage: IDE Controller NVIDIA nForce3 250 Parallel ATA Controller IDE Controller NVIDIA nForce3 250 Serial ATA Controller Disk Drive HDT722516DLAT80 ATA Device (160 GB, 7200 RPM, Ultra-ATA/133) Optical Drive Optiarc DVD RW AD-5170A ATA Device Partitions: C: (NTFS) 153.3 GB (134.7 GB free) Total Size 153.3 GB (134.7 GB free) Input: Keyboard Standard PS/2 Keyboard Mouse HID-compliant mouse DMI BIOS Vendor Phoenix Technologies, LTD DMI BIOS Version 6.00 PG DMI Motherboard Manufacturer http://www.abit.com.tw/ DMI Motherboard Product NF8/NF8-V (NF3 Series) DMI Motherboard Version 1.x Now the problem I am having is when I boot the dvd it boots fine to the bootloader. i type -v (also tryed -v cpus=1) then it comes up with an error which i have attached. I am not sure what it is but I hope someone can point me in the right direction and BIG thanks in advance! Thanks again! James |
#2
|
|||
|
|||
Try installing again but be sure you select "nforce sata/ide" under System---Sata/ide
|
#3
|
|||
|
|||
thanks for the reply chinasky but this happens before it gets to the gui/setup. i am totally stumped.
|
#4
|
|||
|
|||
hey can anyone tell me if i any version of iatkos will work on my computer? i tried installing it, everything is good until it finishes the setup and restarts.
when it restarts it goes into the mac os x but never gets to it. it just gives me an error saying that something went wrong, and restarts again my comp. specs Toshiba Satellite a665 s6070 i7 core --------[ Motherboard ]------------------------------------------------------------------------------------------------- Motherboard Properties: Motherboard ID <DMI> Motherboard Name Toshiba Satellite A665 Front Side Bus Properties: Bus Type Intel QPI Real Clock 133 MHz Effective Clock 133 MHz QPI Clock [ TRIAL VERSION ] Memory Bus Properties: Bus Type Dual DDR3 SDRAM Bus Width 128-bit DRAM:FSB Ratio 4:1 Real Clock 533 MHz (DDR) Effective Clock 1066 MHz Bandwidth [ TRIAL VERSION ] MB/s 💡 Deploy cloud instances seamlessly on DigitalOcean. Free credits ($100) for InfMac readers. |