iPC OSx86 Leopard 10.5.6 Intel AMD SSE2 SSE3

[blast9999]

I installed iPC 10.5.6 on my Gateway MX8738 laptop Core Duo GMA950 using an external usb hdd. My main system is iATKOS v5i updated to 10.5.6 vanilla. I checked video, Intel SATA, Powermanagement pkg, clamshell, AppleSMBIOS Anv MacBook Pro, PS/2 keyboard fix, and everything went fine with a post install of sound patch, trackpadpane, and kext for side scroll. The big change that I noticed with this system is that itunes new smart playlist DOES NOT crash itunes. This worked with both itunes 7 and again with 8 after I did all software updates. Has anyone else noticed this problem "fixed" with iPC Leopard? Nice DVD!!!!

[CravesBgMacs]

Hello!

I've been trying to install OSx86 for weeks now on a MS-7376 based clone with an AMD quad Phenom proc with minimul success. I'm able to boot to the DvD and complete the install with no problems but get the dreaded "waiting for root device" error when trying to boot from the HD after install. I have used the -f flag after each install completes.

I've scoured the net and several message boards and have found that the likely culprit is the chipset on the board. It's the SB600/790FX chipset.

As I said, I'm able to install without issue (have done so 100's of times trying various options) and even use the DvD as a boot disc to log into OSx. Once in, I'm able to access my Windows filesystem which is located on a seperate SATA drive. My IPC install is located on an IDE drive set as Primary Master btw.

When I boot from the disc and into the OS (rd=disk0s2) I don't have any network drivers, sound or video.

My question is basically this.

How could I install the same SATA drivers that the iso uses? it appears to load the motherboard drivers without any problems.

Thank you for any advice you can offer!

[vladrxpx]

i'm having problems with reading NTFS partitions on another hdd..
i installed macFUSE and NTFS-3G and Paragon NTFS and none of those work.

is there something i need to do first ?

[dracea]

@zak ... ia have some pictures with my errors if you can help me pm and i`l send them to you

[shackn]

What options would you recommend with

E8400 - this is overclocked to 3.4gHz
8Gb DDR2
Motherboard Gigabyte P45 DS3
Graphics MSI NVidia 9500 GT (can swap with a 8500 GT if needed from another machine)
SATA AHCI 3xHD (2x750Gb and 1x160Gb)
1xSATA DVD drive 1xIDE DVD drive (can change to SATA if needed)

Should I remove unsupported cards - VStream video capture card?

Tried iDeneb and iAtkos on the above without success but got Leo4All to work on the AMD machine my children use.

Also which method is best for dual boot with Vista 64bit?

Thanks

[flip360]

i have the P5Q and i must say its an excellent board and iPC is working alright on it..just the audio is not working with the provided kext which is strange (@ ~pcwiz i tried a fresh install with the kext provided on the dvd but it didnt worked) i had to install an AzaliaAudio.kext that is working for me (would be glad to provide it for the final build) still no info about the onboard audio in the system configuration window though. The Atheros network onboard chip has no working kext for it, it would be great to have it but you can solve this with a realtek 8139 card which works by default i osx

cheerz

[FirstHackTosh]

Now, the download worked ...
Will arrive the thrid PPF soon? If not, I will burn today the iso

[naquaada]

It's a nice image, the installation options are looking very good. Sadly the image isn't working for me, although I used both patches. My board components are suppoeted 100% since 10.4.6.

The graphics screen is totally distorted at the beginning, the lower half part is black with white blocks and stripes in it. When I change the X1600 kexts with patched ones (Natit/ATIInject removed) it works, but I still have the problem that Quicktime 7.5.5 is so slow, even the intro video stutters horribly. It is possible to generate an EFI string or something for the X1600Pro (ID 0x71c2) ? The card is not slow, the xbench reults are very good.

Another problem is that the image only sets the first partition bootable. I have my test partition as partition 2, it isn't booting after installation. I presume this problem is on all images since the Chameleon bootloader is used.

Why aren't the PS/2 drivers installed automatically? I think a lot of people are using PS/2. The AppleNforceATA driver from slashack with 4 GB support should be on disk, it works great.

[norcimo]

HP Pavilion DV2500 laptop, intel chipset and CPU. Celeron dual core, Used the default chameleon loader, and default kernal.
installation goes quickly. Boots up fast.. used Ps2 keyboard and mouse driver, Graphcis Excellent! Intel GM950 with acceleration GREAT, Sound Conextant HD GREAT!, SUPER FAST. DVD WORKS GREAT, USBS all work... but I cant reboot, cause I wont boot up.

Everything works very well, need to install network driver... but I can't. cause it wont boot up from the initial installation procedure...

I delete that extention ktext file, like instructed...and do a -f at the boot.

And then it boots and hangs. The display that I can see says. Somthing about a framebuffer found ..Ok...

and thats it. Nothing more.! PLEASE HELP??? anyone?

[artstudio]

Pleas can you tell me the procedure to install iPC_OSx86_10.5.6.iso on Your P5Q MoBo.
I have P5Q-E with Blue Ray Pioneer BD 202, 4 HDD WD Raptor, 4 GB of memory. I have tried to instal iPC_OSx86_10.5.6.iso but after a few second of boot action system goes to restart. I think I is because of iPC_OSx86_10.5.6.iso have nor kext file for P45 chip set or Bacause of my Blue Ray DVD (SATA) I am not shore.