[How-To] Snow Leopard Retail (10A432) on P5K-E Wifi A/P -64 bit mode

[fishcow]

Originally Posted by ezshooter Hi guys! Anyone had any luck making onboard WiFi work on a P5K Premium?

I have Wifi working on P5K-E wifi/AP . . . using realtek drivers.
But only in 32 bit.

[adrianmak]

is the ADI988b.Fix.kext work on both 32 and 64bit kernel boot ?


Besides, are you guys with Asus P5K-E wifi/ap motherboard, under the Serial-ATA of System profiler
my information of Serial-ATA shown like this


is it shown correctly ?
The jmicroATA shown as unknown. How to fix it ? My jmicro is configured as AHCI mode in bios.

[Snoc]

Originally Posted by adrianmak is the ADI988b.Fix.kext work on both 32 and 64bit kernel boot ?

DSDT sound Fix plus ADI988b.Fix.kext are required to get audio working. Also they work on both 32 and 64 bit kernel.

Remember create /Extra/Extensions.mkext if you changed any kext in /Extra/Extensions to avoid booting with -f flag. This can be done with Kext Utility 2.3.2

Kind regards,
Snoc

[Snoc]

Originally Posted by adrianmak is the ADI988b.Fix.kext work on both 32 and 64bit kernel boot ? Besides, are you guys with Asus P5K-E wifi/ap motherboard, under the Serial-ATA of System profiler my information of Serial-ATA shown like this is it shown correctly ? The jmicroATA shown as unknown. How to fix it ? My jmicro is configured as AHCI mode in bios.

To fix Jmicron you can try this dummy kext (I don't remember who was the author of this kext, sorry)

[adrianmak]

did the onboard sata port shown as Intel ESB2 AHCI instead of ICH9R (something like that which shown in Leopard 10.5.x) ?

[adrianmak]

Last but not the least. In About this mac, my CPU shown as unknow


how to show it correctly? Mine cpu is Q6600 core 2 Quad

Thx Snoc posted jmico kext on #191 to show properly in system profiler.

[Chrisb27]

Originally Posted by adrianmak Last but not the least. In About this mac, my CPU shown as unknow how to show it correctly? Mine cpu is Q6600 core 2 Quad Thx Snoc posted jmico kext on #191 to show properly in system profiler.

Edit AppleSystemInfo.strings that is located at /System/Library/CoreServices/Resources/English.lproj/. Edit UnknownCPUKind

[adrianmak]

Originally Posted by Chrisb27 Edit AppleSystemInfo.strings that is located at /System/Library/CoreServices/Resources/English.lproj/. Edit UnknownCPUKind

Is there any injector kext or EFI String instead of editing Apple original kext ?

[Chrisb27]

Originally Posted by adrianmak Is there any injector kext instead of editing Apple original kext ?

It's not a kext just a settings file - copy it to the desktop, edit, move back to the location. Authenticate. BAM!

[fishcow]

I'll just quickly mention a big thanks again to all the people in this thread.
So thanks
Also, if anyone is having trouble with microphone / out put levels . . . too low.
Make sure you up your input / output levels in Audio Midi Setup utility in /Applications/Utilities.

I noticed it defaults to around 50-60% (something like that) on my system, but after upping them, I'm getting good results recording stuff from my iphone on both Mic inputs and also line-in.