UHCI/EHCI Built in with dsdt fix

[CyCLoBoT]

I am having a problem with waking my computer up using USB keyboard/mouse. I tried to replace the USB fix code in my DSDT file but I started getting KP. Anyone know how I can fix the USB wake issue on a Gigabyte EP45-DQ6 board?

I have attached my current DSDT file that I'm using.

http://www.mediafire.com/?mol3mzimzmz

[wwbsox]

@cyclobot.

Working on the issue. If you have a USB1 keyboard or mouse, they should wake the system.

I added the usb section to your dsdt, give this a try.

[twr]

after some new DSDT editings, still no luck on my G31M-ES2L with USB Alu. keyboard : sleeps very well, but won't wake without PWRB.

here is my .dsl ...

[CyCLoBoT]

Originally Posted by wwbsox @cyclobot. Working on the issue. If you have a USB1 keyboard or mouse, they should wake the system. I added the usb section to your dsdt, give this a try.

Thanks wwbsox. It does wake up with the mouse without giving any errors.

Update:
Well after I started using your modified DSDT file, I started getting KP. Not sure what's causing it but I had to switch back to my original one.

[wwbsox]

@cyclobot

That was the dsdt that I got from you. I just edited the usb section. But for the record... You have an EP45-DQ6, is this ICH10 south bridge? I know my EP45-DS3L is and I dont need any DSDT patching. Sleeps ok. Wakes from keyboard fine too.

[CyCLoBoT]

Originally Posted by wwbsox @cyclobot That was the dsdt that I got from you. I just edited the usb section. But for the record... You have an EP45-DQ6, is this ICH10 south bridge? I know my EP45-DS3L is and I dont need any DSDT patching. Sleeps ok. Wakes from keyboard fine too.

Yes it is ICH10R. My computer goes to sleep just fine and it does wake up as well but only with the power button.

[EnzoFX]

I got a question about the fact that your supposed to leave device 0x001D0003 alone,
I'm doing this to another board now, and none of it's usb devices have that Name/ID, so then do I not worry about leaving one alone now?

[wwbsox]

@EnzoFX

I believe that is correct. I have seen other boards without the D3 address. The actual addresses that get modified should be D0,D1,D2,A0,A1 and A2.

Also, The USB1.1 hub should work for anybody that "MUST" wake from aluminum keyboard. But I dont have an old hub to test out.

[kDawg]

Originally Posted by wwbsox @EnzoFX I believe that is correct. I have seen other boards without the D3 address. The actual addresses that get modified should be D0,D1,D2,A0,A1 and A2. Also, The USB1.1 hub should work for anybody that "MUST" wake from aluminum keyboard. But I dont have an old hub to test out.

I actually think this is a mistake on Gigabyte's behalf. The D3 device is a mystery. I have a GA-EP45-UD3P and it doesn't reference the D3 address. I also found an error in the USB device section in the DSDT for my other MOBO a GA-EP35-DS4.

Some companys do a better job generating their DSDT than others. I do happen to think Gigabyte does an OK job.

[sylvester328]

Originally Posted by kDawg I actually think this is a mistake on Gigabyte's behalf. The D3 device is a mystery. I have a GA-EP45-UD3P and it doesn't reference the D3 address. I also found an error in the USB device section in the DSDT for my other MOBO a GA-EP35-DS4. Some companys do a better job generating their DSDT than others. I do happen to think Gigabyte does an OK job.

Just upgrading the BIOS for my EP45-DS3R. In the process of DSDT patching, I noticed that the new BIOS (F11e) no longer has this D3 device. They also fixed a couple of bugs which caused compilation warnings as well.

I really hope someone find a DSDT hack soon to enable the wake from sleep using USB2 keyboard.