DELL D620/630/830 kext pack

[slic]

Originally Posted by blacklabelsktr2 Hello, I got almost everything working using your installer, thanks. For some odd reason for the graphics and internet it gave me an error about the kexts not being installed properly, (must have been the version of boot132 I was using). I reinstalled package again and graphics installed fine. Now just the internet will not work. I've tried to use the 2nd Wifi card in my laptop, it's a Realtek (from MSI wind laptop) that I've used in Leo fine, but the WLAN configuration utility does not want to run in SL. Question: I have 10.6.0 and have used the installer package provided to install my kexts.. What is the safest way to upgrade to 10.6.1? Using built in updates and re-installing kexts after the update? Thanks Specs: D630: Quadro 135m: 4GB RAM.

hi, use built in updater, kexts reinstall don't needed. After update all working.

[blacklabelsktr2]

Slic,
Thanks again man, you really made all the harder work easy.

*I fixed my ethernet issue by just deleting the ethernet kext completely and using wifi.
*I fixed my natit.kext issue by re-installing it with the kext helper.
Both issues for some reason said the kexts were not installed properly and could not be used.
*Docking Station - Limited Support - Headphone jack doesn't mute audio from laptop.
*Docking Station - Touchpad quits working after "undock"
*the 10.6.1 update worked great.
*I plan to test out the speedstep
*also plan testing outputting to 1080p 32" via docking station.
*I need to Repair my Hard Drive.. It says it does not pass Verification.
Next Project: Next I will be working on dual boot with windows 7 and chameleon 2rc3.
---------->
Laptop: Dell D630 w/Docking Station
Ram: 4GB
GPU: Quadro 135m
Wifi: RTL8187SE
Audio: Sigmatel 9205
Not Working: Built in Ethernet and primary wifi card.

[teufel2k]

I'm very confused.
The systemprofiler tells me that i have a x3100 and under windows my native resolution is 1440x900! (sorry missed the 40px) The next resolution is 1280x768 in windows!

Isnt that the same in all D630 ?

[slic]

Originally Posted by teufel2k I'm very confused. The systemprofiler tells me that i have a x3100 and under windows my native resolution is 1440x900! (sorry missed the 40px) The next resolution is 1280x768 in windows! Isnt that the same in all D630 ?

hi yes, i have to on my external monitor only 1280x800 (768)
X3100 officialy don't support more

[teufel2k]

Hm, what is so special with my X3100?

My internal Monitor doesn't work and on my external monitor there is no Problem with 1600x900! And I have got a D630 too!

Hmm? perhaps someone knows the difference?

Intel GMA X3100: Chipset Model: GMA X3100 Type: Display Bus: Built-In VRAM (Total): 144 MB Vendor: Intel (0x8086) Device ID: 0x2a02 Revision ID: 0x000c Displays: Display: Resolution: 1440 x 900 @ 60 Hz Depth: 32-Bit Color Core Image: Hardware Accelerated Mirror: Off Online: Yes Quartz Extreme: Supported Built-In: Yes X203H: Resolution: 1600 x 900 @ 60 Hz Depth: 32-Bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported

teufel2k

[rdachs2]

Hello i got several Problems..

I installed 10.6 in the D630 Harddisk using "OSInstall.mpkg" on my Macbook. Just the system, no fonts, no translations..
Then i installed chameleon bootloader 2RC3.pkg.
After this i expanded your "DELL D620/630/830 INTEL X3100.mpkg", so i was getting intel.pkg which i also expanded. I copied everything in there, in the locations on D630 Harddisk.

Then i did the followed in Terminal:
(D630 HDD = "sl")


cd /Volumes/sl/System/Library/Extensions
chown –R root:wheel *
chmod –R 755 *

cd /Volumes/sl/Library/LaunchDaemons
chown –R root:wheel *
chmod –R 755 *

cd /Volumes/sl/Library/Preferences/
chown –R root:wheel *
chmod –R 755 *

cd /Volumes/sl/Extra
chown –R root:wheel *
chmod –R 755 *

Now i was booting the HDD in my D630 and the "after-install-screen" appeared. But only internal keyboard was working. I created my user and now i´m stuck in desktop.

wifi works
sound works
x3100 works

but

usb fail (wake up in BIOS is enabled)
touchpad fail

Also appears multiple boxes with Messages, that "System extension cannot be used" "was installed improperly"

What can i do??

[rdachs2]

Meantime my Touchpad is running well. But usb & bluetooth is broken every second reboot. Which kext is responsible for these two?

Especially after runnig "diskutil repairpermission" much get broken. Why?

[blacklabelsktr2]

Originally Posted by rdachs2 Meantime my Touchpad is running well. But usb & bluetooth is broken every second reboot. Which kext is responsible for these two? Especially after runnig "diskutil repairpermission" much get broken. Why?

Just noticed mine does the same thing...

[blacklabelsktr2]

Originally Posted by rdachs2 Meantime my Touchpad is running well. But usb & bluetooth is broken every second reboot. Which kext is responsible for these two? Especially after runnig "diskutil repairpermission" much get broken. Why?

Radchs2, I think I found a fix for this.. See my last post. Replacing the Boot file fixed it for me. (Doesnt seem to run Chameleon RC2) but atleast usb and bluetooth no longer die every so often.

Make sure you replace the boot file using terminal: (2 lines)
sudo -s
cp /Volumes/NAME OF DRIVE/LOCATION OF BOOT YOU DOWNLOADED/Boot /Volumes/NAME OF DRIVE

[jogu]

Hi Slic. I downloaded the provided kext for my X3100/Dell630 machine. I have iatkos7 in ISO format burned onto a dvd. It's unable to boot with any kind of boot options or bios settings.
Please how can I update my ISO file with the provided kexts?
Tanks a lot