Mac OS X for PC 10.6.2 x64 Edition (x32 compatible)

[Gurqn]

Hello Mates there is a new release with amd support i think first good release for universal
║
║ •Torrent Size: 6.01 GB ║
║ →SnowOSXUniFlash1.0.img 6.00 GB ║
║ USB Image Tool.lnk 1.27 KB ║
║ usbit.zip 225 KB ║
║ USB ItUSB Image tool.exe 4.00 KB ║
║ USB Itusbit32.dll 4.00 KB ║
║ USB Itusbitcmd.exe 4.00 KB ║
║ USB ItUSB Image Tool.exe 134 KB ║
║ USB Itusbit32.txt 3.32 KB ║

║
║ •Mac OS X Snow Leopard 10.6.2 ║
║ →Has all the features of the original ║
║ →Ability to update if they come out UNLESS OTHERWISE WARNED! ║
║ •System Requirments ║
║ →1GB DDR2 RAM (2GB for x64) ║
║ →1024x768 monitor/compatible graphics card ║
║ →8 GB Disk space (HFS+ format [able to do in installer]) ║
║ →USB 2.0 Bus ║
║ →AirPort (for wireless internet, only if desired) ║
║ →1 GHz AMD or Intel Proccessor with instruction sets SSE2 and/or PPF ║
║ ║


║
║ •Questions or comments ║
║ →Contact me at cclloyd9786 @ gmailcom ║
║ →Leave a comment regarding installation failures and successes, or with ║
║ questions that I will reply to, or others if they can help. ║
║ Instructional Video: ║
║ video code dEE84N-mFCI ║ ║ ║
║ ║
║ •Dual boot with Vista/7 (Can't dual boot with XP or older. Google instructions ║
║ for linux. ║
║ →With installing mac first: ║
║ »Boot up to the installer (or to your mac if you have another version install-║
║ ed) and open Disk Utility under Utilities. ║
║ »Create a new partition if you plan on installing it on the same drive, and ║
║ format it to HFS+ (Mac OS X Extended (Journaled)). (Also do with full drive ║
║ if you plan on installing OS X only on the drive) ║
║ »Then if you need to apply the DSDT patch in the installation (you will see ║
║ as you go) ║
║ »Install OS X. MAKE SURE YOU CHOOSE CUSTOMIZE BEFORE THE INSTALL! ║
║ »If you installed the bootloader that is by defualt chosen during the install ║
║ then you do not need to do the dual boot steps of Windows. ║
║ »Now after you have it installed and everything, boot into Windows, and ║
║ install as normal. (If you cant boot into your mac, then use Windows Disk- ║
║ part to set your mad partition or drive as active. ║
║ →With Windows installed first: ║
║ »Create a partition in Windows at least 8GB in size and set it to active ║
║ »Use USBit to make your USB the installer. ║
║ »Boot into your USB and open disk utility. Format your mac partition to HFS+ ║
║ »Apply the DSDT patch if neccessary. ║
║ »Go through the install REMEMBERING TO CUSTOMIZE YOUR INSTALLATION. ║
║ »After installed, and have your OSx86 setup, open disk utulity again and set ║
║ the Windows partition to active (If you Don't want to use the Mac bootloader ║
║ which i suggest you use) ║
║ »After booting into Windows, download and install EasyBCD (Google is your ║
║ friend) and add a new entry. ║
║ »Choose 'Generic x86 PC' for the mac and DONT CHANGE THE NAME ║
║ »Then save changes. Now when you boot up, it will let you choose which to ║
║ boot into. ║
║ →If you don't understand anything, google it or ask me. Or go to OSx86.com. ║
║ THEY ALSO HAVE A FULL LIST OF COMPLETELY COMPATIBLE HARDWARE! ║
║ •If you cant boot because you have a x32 PC, then use the bootflags ║
║ -v -x32 ║
║ If you load a few kernals then your screen flashes white and goes black use ║
║ voodoo -v -x32 ║
║ ║
╚═════════════════════════


Already found on arenabg and nice download speed.

Edit:

Video Tutorial

Youtube dEE84N-mFCI

Enjoy mates