How Install OSX Lion on PC

[yasinakgun87]

and if I select my leopard OS this is the screen that comes up:

[yasinakgun87]

ok, i've followed sarg's advice of:

1st: follow pippox0 tutorial. 2nd: Install Chameleon-2.0-RC5-r947 instead of Chameleon 2.0 RC5 -755.pkg on OSX Lion Boot usb. 3rd: When ins etc..

now, when I boot from flash drive, I get the loading circle going round and round and round..

[simakwm]

I used kextwizard to try to fix permissions on the USB stick after doing all steps but it hangs showing that.

The timeout error appears minutes after "nothing to load" .
Is it because of file permissions or not?

Thanks in advance.

EDIT: After changing everything on the USB stick to root/wheel and chmodding 644 LaunchDaemons/* I was able to boot but the installer shows up these:

Log:

Maybe I shouldn't mess with permissions like that :P

[jarski58]

Hellou, can enybody tell, what's going wrong...

When I boot my pc laptop from usb lion stick, it's go and go and go...
and then, it stop and reboot again...(see the picture, when)??

SORRY MY BAD ENGLISH!!

[pippox0]

Originally Posted by simakwm I used kextwizard to try to fix permissions on the USB stick after doing all steps but it hangs showing that. The timeout error appears minutes after "nothing to load" . Is it because of file permissions or not? Thanks in advance.

Hi,
YES you have to repair permission on USB on /System/Library/LaunchDaemons
use terminal and type

chown -R root:wheel /System/Library/LaunchDaemons

chmod -R 755 /System/Library/LaunchDaemons

Cheers

PippoX0

[analot]

Originally Posted by simakwm I wasn't able to repair permissions neither on the USB stick or on the LIONOSX.dmg. I think this is a critical step right? The "Repair permissions" button is always disabled on them. What did I forget?

i also encountered that, but i just ignore that step and proceed. after i finish installing on my HDD i run Kext Utility, OSX86 Tool and check repair permissions. and also u can do that step after installation on your HDD, just run Disk utility and repair permissions in your newly installed lion HDD.

Every time i get an error on boot i just do this steps:


a. Install Extra_Lion.pkg to USB Flash Drive
b. Install Chameleon 2.0 RC5 -755.pkg to USB Flash Drive
c. Install PCEFI 10.6 Lion+Snow.pkg to USB Flash Drive
After installing "a , b, c" on my Flash drive i always create a folder "Extensions" inside /Extra , and i paste (ElliottForceLegacyRTC.kext, fakesmc.kext, NullCPUPowerManagement.kext)

Hope it help. If you do this steps and still stuck just power off your pc and try to boot again.

[simakwm]

i also encountered that, but i just ignore that step and proceed. after i finish installing on my HDD i run Kext Utility, OSX86 Tool and check repair permissions. and also u can do that step after installation on your HDD, just run Disk utility and repair permissions in your newly installed lion HDD.

Yeah, but the problem is that I just can't launch the installer properly. I will redo everything and change permissions like PippoX0 told me to.

EDIT: Well, no success. It keeps telling me to clean the media

[analot]

Originally Posted by simakwm Yeah, but the problem is that I just can't launch the installer properly. I will redo everything and change permissions like PippoX0 told me to. EDIT: Well, no success. It keeps telling me to clean the media

Try to start again from 1st step

Start Mac Os X Leo /Snow Leo 0. Create OSX Lion for Hackintosh ------------------------ a. Download Lion GM/Retail (11A511 ) b. find InstallESD.dmg -> "Install Mac Os X Lion.app/Contents/ShareSupport" Open and mount InstallESD.dmg Show HiddenFiles -> here http://gotoes.org/sales/ShowHiddenFilesMacOSX/ Find BaseSystem.dmg inside InstallESD.dmg Mount BaseSystem.dmg c. Using Disk utility create an new immage.dmg DVD 4,6 Gb read and write , rename like Lion.dmg d. Using Disk utility restore BaseSystem.dmg on new image Lion.dmg e. mount Lion.dmg and rename volume like OSX LION Delete packages link inside /System/installation Copy Packages folder from InstallESD.dmg to Lion.dmg inside /System/Installation/ folder f. Copy needed Kexts on Lion.dmg inside /System/Library/Extentions *fakesmc.kext * nullCPUPowermanagenent.kext * ElliotForceLegacyRTC.kext -> this only if you experience Bios reset Copy Mach_Kernel from InstallESD.dmg to Lion.dmg Copy OSinstall.mpkg patched for MBR inside /System/Installation/Packages Copy OSinstall. patched for MBR inside /System/Library/PrivateFrameworks/Install.framework/Frameworks/OSinstall.framwork/Versions/A folder g. Install Extra_Lion.pkg on Lion.dmg -> here http://www.mediafire.com/?09zjtvcpqqpi9cg h. Install Chameleon 2.0 RC5 -755.pkg on Lion.dmg -> here http://www.mediafire.com/?67ixrw6tjl55949 include this: j. Install PC-EFI 10.6.pkg to USB Pen -> here http://www.mediafire.com/?vec09o8nifdgq7n

1. Create Bootable USB pen with OSX Lion -------------------------------------------------------------- a. With Disk Utility erase USB pen GUID + HFS+ journaled rename it "OSX Lion Boot" b. With Disk Utility restore Lion.dmg to USB Pen

and don't forget to do this:

a. Install Extra_Lion.pkg to USB Flash Drive b. Install Chameleon 2.0 RC5 -755.pkg to USB Flash Drive c. Install PCEFI 10.6 Lion+Snow.pkg to USB Flash Drive After installing "a , b, c" on my Flash drive i always create a folder "Extensions" inside /Extra , and i paste (ElliottForceLegacyRTC.kext, fakesmc.kext, NullCPUPowerManagement.kext)

[yasinakgun87]

do I no longer matter? lol

[simakwm]

I wonder why I am not able to repair permissions on Lion.dmg or the USB stick..

EDIT: Followed analot's advice and did everything again from the beggining (started a fight with my wife so she's not talking with me so much and I earned some hours of peace to work on this ), plus the additional steps he told me.

Anyway, I had to fix permissions on the USB stick by hand:

cd /Volumes/OSX\ Lion
chown -R root:wheel *
chmod 755 /Volumes/OSX\ Lion/System/Library/Launchdaemons
chmod 644 /Volumes/OSX\ Lion/System/Library/Launchdaemons/*

Voila! The installer now works. Updated my SL installation but it reboots right after loading kexts.