@eemerge

I think i must have misunderstood, but i read that iatkos 5i can be updated like a regular mac..so i applied the update from inside the OS, and on reboot, it hangs. Any ways to make it work or at least rever to 10.5.5 without reinstalling…

I'm trying to install osx 10.5.1/2 on my windows xp via VMWARE. I have downloaded : - Kalyway 10.5.2 AMD INTEL iso - Leo4All - Zephyroth 10.5.1 I've searched forums and google and after lots of tests and changes in vmware configs, the best…

I want to install Leopard on my machine, which already has : Vista and Xp (default booting is Vista, i choose from there what to boot, vista or xp). My wishes would be to install Leopard on the same hard drive with vista (xp has another 80…

I had a problem for the past few weeks, since i got 4GB of ram , when the ram was almost full, mac osx crashed with the gray screen. I thought it might be the memory modules, changed them with another completely different 2 ...same…

I've been using iatkos for several months , everything worked fine... Today, i ran into a little problem. im sharing the internet connection on iatkos with a laptop. Until today all was FINE, today the laptop didnt communicate with the…

I need to edit the etc/hosts file on my iAtkos 5i system, but…i have no 'hosts' file in /etc (also tried /private/etc/ , still no hosts file). Any ideeas?

I wanna get an Asus 7300 GT to use with my iAtkos 5 installation. Right now i have a 7100 GS and since im planning to later do a second pc with iatkos, i thought i get a card that`s "supported" by iatkos (its listed on iatkos wiki of…

Im having a really hard time installing Kalyway (10.5.2) or Zephyroth (10.5.2 Rev 2) on my AMD based pc. Zephyroth is working, installing..but after reboot, when it should boot up, nothing happens.Not even a 'Disk boot failure' message.…

i've installed iatkos 5 (the latest version) , didnt work from the 1st try but eventually i managed to make it work, so far works fine (im typing from iatkos) but i have a big problem. As i didnt find any driver for gtx 280 and from what…

Still no success with my installation of macosx of any kind on my PC in VMWARE...still im trying different stuff I noticed a problem on all of the tried installations: osx installer says at one point something like "root is…

I am thinking of installing iatkos 5 on a computer on which windows xp takes forever to do stuff The computer is a CEleron 2.4 Ghz, 1 G ram, and a gf mx 64 MB ram ( i know, sucks). Think its possible to install iatkos on this computer and…

“Good news! I went back to the initial drivers, and following lanceomni`s advice not to have 2 drivers installed, i followed the 'procedure' , removed the nvinject and only left the Titan drivers ..and it works! Generic NVIDIA: Chipset Model…”

“i backed them up. i read the post about the efi strings...im thinking to give it a try..is it still safe so that i wont have to reinstall the whole system? also, do you think there could be a better hope if i put back my gtx 280 ? p.s. list…”

“i looked a little on the Efi post of nfoav8or , downloaded the little tool, and my card is int he list : 7100 128 MB ram...maybe you could give me some instructions to what to do using that? Thanks, and thanks for all the help so far”

“same thing... I Can Has Model?: Chipset Model: I Can Has Model? Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device ID: 0x016a Revision ID: 0x00a1 Displays: Display: Resolution: 1024 x 768 Depth:…”

“The id`s from the little tool are: 10de:016a the card is identified as: GeForce 7100 GS im about to reboot now with nvkush”

“oh oh oh...my big bad.. now i looked on the card box, its a 7100 GS MSI ... im not using this card since i got my gtx 280 so i didnt know exactly, sorry.. so, its: MSI NX7100 GS 128 RAM”

“just restarted, now im in 1024x768 (before this i was in 1680x1050) System profiler says: Graphics by NVIDIA: Chipset Model: Graphics by NVIDIA Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device…”

“so far so good...its now fixing permissions ... im waiting , no more operation permitted when doing the commands one by one.. The final result is: p.s. i just checked for Extensions.mkext , is there..should i delete it?”

“-r-sr-xr-x 1 root wheel 48160 Nov 29 2007 /usr/bin/su”

“hopefully i wont have to do a full reinstall... now what do i do with the Operation not permitted ? (post above last post of yours)”

“on the " sudo chmod -R 755 /System/Library/Extensions && chown -R root:wheel /System/Library/Extensions " command , i get :Operation not permitted ...is it normal ?”

“thanks a bunch im about to try it now, a quick question before: is there any chance my system wont boot aftewards and i will have to do a new install?”

“it hanged once after mounting the other hard disks, and once i dont remember where... anyway meanwhile i reinstalled it and i will keep it to 10.5.5 . also i have changed my video card since i was on VESA with my GTX 280. Now im on a 7200 G…”

“[cite] Puttabong:Sorry, posted the wrong link first Thanks , quick answering I will look into it...i just read a little bit of the requirements and it says it needs Tiger installed..can it be done without ? (i guess only for AMDs it needs t…”

“My mistake i guess for saying "other systems ", all i ment was that i already have vista and xp installed and i dont want to reinstal them. But i see your answer WinLinMac01 covered it all so thanks i am going to try to install Leopard on a…”

“[cite] DoiX:SOLUTION for Dual/Triple booting Mac OS X, Windows, Linux, on the same Hard Drive thanks..but from what i've seen those tips are for installing macos and the other systems...i already have windows (xp and vista) what if i instal…”

“Ok i booted with iatkos 7 and managed to copy my backup jmicron in the Extension folder, and mac os booted normally. Still, i am left with the problem of freezes (if i use more than 3 GB of ram). Maybe anyone has a solution for this?”

“I think something screwed up in iatkos, since on Vista, everything worked OK without any modifications. Also, this happened suddenly, i didnt change anything on the laptop or desktop. I'll look more into it maybe i`ll find a solution. Thank…”

“Ok i set up the connections as you said, still i am not getting anything from my laptop. The problem is it just stopped working during the day. I didnt do anything or change anything, and this is very strange. Until now , i had the laptop o…”

“Meanwhile, my internet connection came back. Im not sure if it is because of the fact that i deleted and added again a ethernet connection for the network card that was connecting to the ISP modem , or something else happened; its very stra…”

“since no one answered , i decided myself so i went for the 256 MB version. Booted up fine, at first boot, and Profiler sees it as it should...so far so good guess this topic can be closed if there`s of no interest to anyone else.”

“ok so finally it DID boot after restart (im not sure what i did )…now..of course..another issue Loading Leopard takes like A LOT...as im writing this , i have been waiting about6-7 minutes...and im just at a black screen with the spinning-w…”

“thanks a bunch zuz242, i will look into all of the things you said... for a specific hdd boot, i dont think it was the case because i only had my Leopard hdd and my dvdrw active when i installed and when i restarted, so only 1 hdd and still…”

“well i installed again Zephyroth 10.5.2 rev 2, because i did miss something yesterday...i didnt choose MBR within DiskUtility when installing Leopard. Today i chose it, i isntalled the MBR Boot Loader , but still my Leopard wont boot. Can a…”

“Another thing, zephyroth since (i guess) its your version the Zephyroth release , i found a post somewhere on how to make Zephyroth boot after restart, but it requires me to enter -s mode when booting from DVD...the problem is i have a ps2 …”

“Gigabyte M57SLI-S4 http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2287 (here are the chipset specs , or you can look at the link above): 1. NVIDIA® nForce 570-SLI 2. Super I/O: ITE IT8716 chip. 3. Integrate…”

“a big THANKS for all the help”

“what if i dont have any backups on timemachine?”

“hey thanks, sorry for the late reply, ur advice worked just fine Thanks again”