iAtkos v7 wont recognize my SATA hard drives
I'm totally new to setting up Hackintosh systems and just want to for evaluation purposes. is there something i have to change in the bios for iAtkos to see my two SATA hard drives? (btw, i used Gparted to create a 15GB hfs+ partition on…
- Primary Author
- @jmkloz Published 2009-10-07
- Collection
- Leopard 10.5
- Archival Footprint
- 7,926 historical reads · 7 curated field notes (from 9 dispatches) · 2009-10-07 – 2009-10-11
- Credited Voices (4)
- @jmkloz (5)@thorazine74 (2)@mastnavoday@punk_zappa
- Hardware Reference
- SATA III & NVMe SSDs ↗ USB 3.2 Boot Flash Drives ↗ Workstation Coolers & Thermal Gear ↗
I'm totally new to setting up Hackintosh systems and just want to for evaluation purposes. is there something i have to change in the bios for iAtkos to see my two SATA hard drives?
(btw, i used Gparted to create a 15GB hfs+ partition on my secondary HD for mac. windows 7 is on my primary hd).
Synthesized Community Field Notes
7 technical responses curated from 9 original dispatches
It depends on your hardware, I dont know which SATA controllers iAtkos supports but if yours is not in the list you wont see any drives connected to it.
If you can change the SATA into AHCI mode it will be supported.
thorazine74 → is right I also get this problem then it is solved by setting Sata mode to AHCI in BIOS
only problem... I dont get the option to change that in the bios... any other way around this... maybe another distro that supports AMD and SATA?
HP Pavilion dv9000;
Motherboard Model: Quanta 30D1
Motherboard Chipset: nVidia nForce 630M (C67)
Video Card:nVidia GeForce 7150M / nForce 630M [HP]
Processor Name: AMD Turion64 X2 TL-58
If you dont have AHCI mode your SATA will still work in IDE mode but nforce chipsets without AHCI have bad support, you may try but you may find yourself most distro wont see your drives.
You could try updating your BIOS to see if you get AHCI added, I think your chipset is MCP67 and that supports AHCI hardware-wise.
ok so i ditched my internal HD and installed in on my external usb HD. installations when fine, but whenever i start iAtkos my computer restarts... and suggestions?
Never mind, i figured out my problem... just need to install the voodoo kernal
Sources & Contributor Provenance (4 credited usernames · Thread #4354)
| Username | Dossier Contribution | Dispatches | Active Window |
|---|---|---|---|
| @jmkloz | Primary Author | 5 | 2009-10-07 → 2009-10-11 |
| @thorazine74 | Contributor | 2 | 2009-10-08 → 2009-10-09 |
| @mastnavoday | Contributor | 1 | 2009-10-08 |
| @punk_zappa | Contributor | 1 | 2009-10-08 |