@crawle

## Automatic notice to thread opener: If you post this kind of message into the News Category again, your Account will be disabled Hey guys, For two weeks I was trying this stuff, and NOW it worked - a little bit: I installed Leopard by…

I know, it's a well discussed topic, but it always ends with "Hey, we're AMD, not Intel". I think that's no reason to capitulate, so let's start collecting information about sleep on AMD. I think it's not only up to the processor, but to…

I think, I'll make a new discussion for this, 'cause it's very important for me. I've got Zeph's Leopard working and a GeForce 6600GT. Following situation: Two monitors: Benq 19" plugged in by VGA + LG 20" plugged in by DVI 1st situation:…

I found many instructions to inject kexts into the Leopard DVD-Image, but I haven't installed Leopard yet, because my hd doesn't run (I have a VIA-Chipset - not supported in Rev 1). So how can I inject the VIA-Kext in my image? I've got…

I heard, that Boot Camp is only a Boot Manager for Mac OS X. So I wondered, if there isn't a method to install Boot Camp on an Zeph-AMD-OSX - but without EFI. I have following hard disk structure: {First Hard Disk} - 400GB, ATA, disk0 --…

I've got a very, very strange problem. I had it in my old JaS Tiger to. I'll describe it: When I boot, it appears my Windows Bootloader. I select "OSX86" and the Darwin Bootloader appears. I click double-enter (for start without any…

Today I decided to upgrade to 10.5.3, so I downloaded the installer with ASU (newest version) and it patched the package succesfully. After that I installed it on my "Test-Partition". I restarted and installed the new (amd-patched) Kernel.…

I started looking through this OSX86-Stuff, but I finally don't know, what's really best version for me and my PC. I've already tried the (great, great, great!) Zephyroth-Version, but aa unknown kernel panic occurred (we discussed about it…

after reinstalling OSx86 on my second harddrive with GUID I wanted to add OSx86 (Zeph's Leo 10.5.2 Rev1) to my Windows Bootloader again. But I couldn't get it work with the chain0 file. It says "chain0 error". I think its up to the fact,…

## Automatic notice to thread opener: If you post this kind of message into the News Category again, your Account will be disabled Hey guys, short and precisely: How can I add a volume from another HDD to the Darwin Bootloader? Or is there…

strange problem: every time I install(ed) OSx86 and EyeTV3, at first EyeTV worked perfectly with my Hauppauge HVR 900 stick. But after a while and editing some kexts (especially the video drivers) EyeTV started crashing at start. Because I…

in the last weeks I updated my system two times, 10.5.2 to 10.5.3 and 10.5.3 to 10.5.4. It seemed to be working at all, but now, after a few weeks of working and playing (games) on the updated system, I see many graphical problems. For…

“I think, I've got the worst results Though my Hackintosh works like a dream, trust me. -crawle”

“OS: Leopard 10.5.1 by Zephyroth on MBR without EFI Board: EPOX 9HEAI Rev. 3 with VIA Chipset CPU: AMD Athlon 64 3200+ Venice RAM: 2GB DDR SDRAM (4x 512MB @ 200Mhz) Graphics: NVidia GeForce 6600 GT HD: Samsung 400GB (ide1) + Seagate 140GB (i…”

“Please excuse me guys, if this was already mentioned here, but I can't read 30 pages at once I found following "bugs": - Some language files are missing for new features like list stacks. I've got the german languagepacks installed, but on …”

“I just selected the newer ToH-Kernel, MBR-EFI bootloader, NVidia drivers and AC97-Audio. Install went fast (about 20min) and my specs are: AMD Athlon 64 3200+ NVidia Geforce 6600GT VIA Chipset 400GB ATA IDE 160GB ATA IDE ...”

“Nice graphic I think it's made by yourself, isn't it? -crawle BTW: We've got the same processor type A3200 forever!”

“What about Boot Camp? I'm serious! On EFI with GUID should it work, shouldn't it?”

“@xan: I don't know if it works with GUID/EFI. Doesn't seem so. I'm sorry. With MBR that would be all... -crawle”

“Or you copy the chain0 file from your Leopard System to the root of your Windows partition. Now add C:/chain0=Leopard to your Win-Bootloader. (only on XP) P.s.: Select in BIOS the HDD priority to the Windows' one ...”

“Greetings to FoneBone (Berlin rocks!) and xlslx (Germany though, too)”

“@7eventh: Yeah! Berlin rocks! (I'm from there, too)”

“Ok guys, let's continue the thread with YOUR ACTUALLY TIME! In Germany, it is now 12:39 - so what time is now in your country? I think it's interesting, because in this moment, a lot of members are online... =)”

“Oh my god, me, too. Ok, Jack: We'll become friends! (arrange it to him)”

“Muahahaha, "Jack". Sure you are from Germany? I thought here dogs have to be named like "Fiffi" or something else Stuff it, greetings to Jack”

“[City], [Country] - [time] So, still Berlin, Germany and it's 3:22 PM (15:22) ... now you!”

“Germany, Chicago/USA, Netherlands, Wales/UK, France, Spain, Canada, Portugal, Russia, Poland, Romania, Brazil, Italy, Georgia/USA, Boston/USA, Australia, Florida/USA, Venezuela, Belgium, Montenegro, Mexico Not bad. Hey, let's found a new pl…”

“"Grüße" (greetings) to naquaada, Puttabong and creative_ I'm from Berlin, Germany”

“how can I get something like CPU load and Network Up- and Downspeed upon my bar? (where the watch is etc.) I saw it on many desktop pictures ... -crawle”

“Start with -v flag and make a photo of your kernel panic. -crawle”

“@bacardi: for some chipsets, it IS possible. But in most cases (as far as I know) you have to inject a kext for your chipset into the dvd/image. You can do this with transmac. Have a look here: 3rd Party Drivers - OSx86 . copy the .kext int…”

“I think, when injecting kexts with XP (transmac) permissions doesn't matter. Maybe you should inject a kext for your chipset to be sure, that SATA'll work. Did you try it without any changes to your image/DVD? P.s.: Use DVD-RW, so you won't…”

“Okay, I've tested it. It works, but at mine only one monitor. Like before.”

“Does this nVidia kext work on my Zeph Leopard? Maybe with it I can get my dual monitor work. -crawle”

“My HDD slides up and down in my pc, 'cause I had to bring it one track up (cable to short) and there are no fitting holes for fixing the HDD.”

“Hey Skyper. I don't know really, what your problem is, but try following: - plug the DVD-Rom and the HDD about one cable into the IDE or SATA port - set the HDD to Master (by setting the jumper on your HDD) and the DVD-Rom to Slave (by sett…”

“I'm looking forward to Rev. 2 and I have a little question about it: I've got a kernel panic, something like this: Panic (cpu 0 caller 0x0036DAC7):"Process 1 exec of /sbin/launchd failed, errno 88\n"@/volumes/disk1s2/leo_xnu-1228/bsd/kern/k…”

“I used "cpus=1 -f -x". Then, I used the "Already have and import from another volume"-Option. And it worked!”

“I got it work with a lot of flags and choose my Tiger partition to load. So it worked for me. Now my "kext"-question: Does anyone know, how to get Dual Monitor work on my GeForce 6600 GT ? Actually I can only use my VGA-Screen. DVI doesn't …”

“Okay. I'll try to. Thanks a lot, DoiX. I'll answer here, when the installation was finished and EFI installed. -crawle”

“Sorry, I don't know if it hang - I wasn't there. Not special exciting I think it's Rev 1 ... this torrent: edit by pb : POSTING links of this kind is not allowed and causes a ban, so please don't post them! edit by me : Alright, I'm sorry. …”

“I can't boot leo at all. By the way is my PC sometimes just rebooting after loading kexts. But when he passes this, he's hanging at BSD Root. AMD Athlon 64 3200 Venice (SSE3) GeForce 6600GT Epox Mainboard with VIA-Chipset First HD: Leopard …”

“Ok, tried again. But same hang at BSD Root. (see screenshot above) Any solutions? Thanks, -crawle”

“Ok, I'll wait. Make a cup of coffe and wait ... P.s.: I tried already with Graphics Mode P.p.s.: Who's irritating who? (EDIT: Ok, nobody ^^)”

“Oh thanks DoiX. I'll try this. But after reboot my PC, I can't even start Leopard anymore. The result on bootup, is this screen:”

“Oh, it's a pitty. So is there no way to install Leopard?”

“Alright. It worked. So I rebooted ... and ... "System config file 'com.apple.Boot.plist' not found. ... Any idea?”

“BTW: just "unmount -f ..." doesn't work. Only "diskutil unmount" works, but without the flag.”

“So what should I do first? I think, I didn't understand you right, excuse me.”

“A little question: I couldn't use the "unmount"ing when installing EFI (unknown function or similiar), so I skipped it. I can't execute the last command: dd if=./guid/boot0 of=/dev/disk0 bs=400 count=1 It says: Ressource busy -crawle”

“Can't answer your question, but do you know punctation marks? Like ".", ",", "!", ";" and "?"? Maybe this will help to structure your sentences better ... Thanks Aquilosx! -crawle”

“Now, I'll burn the image and try to install Leopard. LEOPARD WILL BE MINE! Muahahahaha”