[How-To] Snow Leopard Retail (10A432) on P5K-E Wifi A/P -64 bit mode

[lidas]

I have a problem
I have a mobo P5K-e wifi

when I was 2giga ram was fine
now that I put the new ram OCZ Reaper PC8500 8GB DDR2 1066 is no longer
evil black screen comes on and turns off
What can I do??

[lukelovett]

Originally Posted by lidas I have a problem I have a mobo P5K-e wifi when I was 2giga ram was fine now that I put the new ram OCZ Reaper PC8500 8GB DDR2 1066 is no longer evil black screen comes on and turns off What can I do??

Rebuild your DSDT. You need to after ram changes.

[flicka]

Upate successfully to 10.6.5. I've only to repatch ionetworkingfamily.kext

[fishcow]

Long time no post.
I have a dilemma that I'm hoping one of you fine people could help me out with.

I have been successful in applying enough dsdt patches posted here to enable the use of native PowerManagement and therefore Shutdown, Restart and Sleep all working in dsdt.
I would like next to try and take control of the stupid-high CPU temps I'm getting running Apple's PowerManagement.

I have found a lot of conflicting and confusing information regarding editing dsdt and entering P State tables etc. I also tried using Q6600 patches available in many dsdt editing software in combination with voodooMonitor - but frankly I didn't see any changes.

I saw mention of Chameleon 2 RC5 (218) which has P and C States injection, but it's been a long time since I have had to install a new boot loader (still using RC3 here) and a bit sketchy on how best to go about trying this out.

I have since reverted to a dsdt that doesn't have any _CST methods inserted by any patching.
I have confirmed that AppleLPC is loading.

Just not sure if I can jump from RC3 to RC5 by just swapping out the boot file and editing the com.apple.Boot.plist to add in the new flags for p and c states injection.

I think that about covers it.
Any help appreciated.

BTW, because I'm still on Chameleon RC3 - I still have PlatformUUID and OSXRestart in my E/E .
I assume I should get rid of those if I can install the new bootloader?

[spanakorizo]

hello everyone, it's been a long time since i looked around, so what is the current status of onboard sound and snow leopard?
cause for 2 years i had an external card (m-audio/modified crappy drivers) and now i want to get rid of it and go back to the onboard.
Last time i used the onboard sound and ad1998b.kext the status was:frontpanel no work (i think..i am not really sure) and by digital connection you couldnt mute or change the volume slider, and also sometimes crappy noise sound at boot.
Still the same or somebody fixed 100% ad1998B?

in case you would like to try my dsdt methods, download my .aml here:
http://www.insanelymac.com/forum/lof...hp/t88827.html
mobo is p5k-premium wifi

[spanakorizo]

the dsdt edits came from lancelotu at page3 were allready at my old dsdt so i still use dsdt fix+ad1998b.kext,
i rebuild my extension.mkext,reboot with onboard sound and this is what i get:
Untitled.jpg
the most important that i remember also made me find another card is no 5.1 in the audio MIDI setup, only stereo
and i confirm that the volume slider doesnt move. (in Digital Out)
how about you?
still is like this or something changed?

[alhazred23]

Hi all

This has been an excellent thread and I have learned much.

I have an ASUS Commando board that isn't very well supported in the OSX86 world and have been building up my DSDT from scratch. I've got it almost perfect now, but am still struggling with sound.

I have used all methods mentioned in this thread (and many others!) but I can't get it to work. I've got the speaker icon on the desktop and system profiler recognises I have audio (thanks to the DSDT edits and the AD1988b_fix.kext) However, there's no sound coming out. I've got my speakers plugged in the back to the Green plug. I think the Commando may use a different pin config and I was wondering if anyone here knew how to create your own pin config. I tried some alternative ones, but I'd like to make my own. Where do I start?

Thanks

[bingaling]

hi all, first i'd like to say what a great post this is, i've a smooth hack pro thanks to it!
the only peculiarity is that all internal disks apart from the boot drive appear external... any know how to fix this? previously this wasn't the case, then i had to restore from time machine and this happened...

[Chrisb27]

Used this installation method, hardware is in my sig - downloaded and ran the combo update, no issues with 32 bit thus far. Rebooting to check 64 bit.

Edit: Good to go 64 bit as well.

[fishcow]

[quote=fishcow;34274][
ROFL
I still had BlockStorageInjector in my Extensions.
Took it out and now my drives are reported correctly.
Thanks for the help again